Product ID:IBM 3800 TONER
MSDS Date:08/08/1991
FSC:6850
NIIN:01-050-4528
MSDS Number: BQKRY

PELIKAN INC TONER DEVELOPER DIV

1 IMAGING LANE
DERRY, PA 15627
US

Info Phone: 412-694-2792

Preparer: HARRY P. CONNELLY

Cage: 47811

PELIKAN INC TONER DEVELOPER DIV

DERRY, PA 15627 US

Cage: 47811

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: 10-15%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9293

STYRENE ACRYLATE

CAS: 67953-61-1

Fraction By Weight: 85-90%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:THIS MATERIAL WHEN USED AS INTENDED,
DOES NOT REPRESENT A HEALTH OR SAFETY HAZARD.
Explanation of Carcinogenicity:MANUFACTURER STATES "CARCINOGENS-NONE
PRESENT".
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE WHEN USED AS DESCRIBED BY
PRODUCT LITERATURE.

First Aid:EYES: FLUSH WITH WATER. SKIN: WASH WITH SOAP AND WATER.
INHALATION: REMOVE FROM EXPOSURE. INGESTION: DILUTE STOMACH
CONTENTS WITH SEVERAL GLASSES OF WATER.

Extinguishing Media:USE WATER, FOAM, OR DRY CHEMICAL.
Fire Fighting Procedures:AVOID INHALATION OF SMOKE
Unusual Fire/Explosion Hazard:TONER IS A COMBUSTIBLE POWDER. WHEN
DISPERSED IN AIR, IT FORMS EXPLOSIVE MIXTURE.

Spill Release Procedures:LOOSE TONER CAN BE REMOVED USING A VACUUM
CLEANER. RESIDUE CAN BE REMOVED WITH SOAP AND COLD WATER. AFTER
REMOVAL OF LOOSE TONER, GARMENTS MAY BE WASHED OR DRY CLEANED.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID PROLONGED INHALATION OF
EXCESSIVE DUST. AVOID STORAGE TEMPERATURES IN EXCESS OF 90F.
Other Precautions:DO NOT HANDLE IN AREAS WHERE WIND BLOWS. FLYING
POWDER MAY ENTER EYES. MINIMIZE INHALATION OF DUST.

Respiratory Protection:NONE REQUIRED WHEN USED AS INTENDED IN COPIER OR
PRINTER EQUIPMENT.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:NONE NORMALLY REQUIRED.
Eye Protection:NONE NORMALLY REQUIRED.
Other Protective Equipment:NONE NORMALLY REQUIRED.
Work Hygienic Practices:FOR USE OTHER THAN NORMAL CUSTOMER-OPERATING
PROCEDURES (BULK PROCESSING) GOGGLES AND RESPIRATORS MAY BE
REQUIRED.
Supplemental Safety and Health
IDENTIFIED ON THE MSDS AS PRODUCT CODE: 7050.

HCC:N1
Spec Gravity:1.0
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FINELY DIVIDED BLACK POWDER; FAINT ODOR.

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:PRODUCTS OF COMBUSTION ARE TOXIC.

Waste Disposal Methods:DO NOT INCINERATE. NO SPECIAL TECHNIQUES BEYOND
NORMAL PRACTICE. INSURE CONFORMITY WITH FEDERAL, STATE OR LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.