Product ID:"1 SHOT" (R) LIQUI-SEAL
MSDS Date:01/01/1987
FSC:8010
NIIN:00F003987
MSDS Number: BBPGG

CONSUMERS PAINT FACTORY/GARY, IN 46406

Emergency Phone: (219) 949-1684

Cage: 13294

CONSUMERS PAINT FACTORY INC

6398 GARY, IN 46406-1563 US

Telephone: 219-949-1684/800-424-9300(CHEMTREC)

Cage: 13294

METHYL ETHYL KETOXIME

CAS: 96-29-7

RTECS: EL9275000

Fraction By Weight: <.1%

RESIN SOLIDS (SEE SUPPLEMENTAL FOR INGREDIENTS)

Fraction By Weight: 40%

NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: 40%

OSHA PEL 100 PPM

NAPHTA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: DE3030000

Fraction By Weight: 10%

OSHA PEL 100 PPM

COBALT (SARA III)

CAS: 7440-48-4

RTECS: GF8750000

Fraction By Weight: .1-1%

OSHA PEL 0.1 MG/M3;AS CO

ACGIH TLV: 0.05 MG/M3;DUST 9293

Effects of Overexposure:DIZZINESS, GIDDINESS, NARCOSIS, CENTRAL SYSTEM
DEPRESSION.

First Aid:IF OVERCOME BY VAPORS, REMOVE TO FRESH AIR. IF NOT BREATHING,
RESTORE BREATHING. IF INGESTED, DON'T INDUCE VOMITING. EYE CONTACT:
FLUSH W/WATER FOR 15 MINS. SKIN CONTACT: REMOVE EXCESS MATERIAL
W/PAPE R TOWELS/RAGS. WASH W/SOAP/WATER. GET MED ATT.

Flash Point:82 PMCC
Extinguishing Media:CO2 OR DRY CHEMICAL
Fire Fighting Procedures:WATER USED TO COOL CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:DON'T ENTER THE FIRE AREA W/OUT PROPER
PROTECTIVE EQUIPMENT, INCLUDING SCBA.

Spill Release Procedures:ELIMINATE ALL HEAT SOURCES, OPEN FLAME, AND
OTHER SOURCES OF IGNITION. ABSORB WITH SID ABSORBENT. SHOVEL INTO
CONTAINERS. IF LARGE QUANTITIES ARE SPILLED, PSONAL PROTECTIVE
EQUIPMENT MAY BE REQUIRED.

Handling and Storage Precautions:KEEP CONTAINERS CLOSED WHEN NOT IN
USE.
Other Precautions:HANDLE CAREFULLY IN ACCORDANCE WITH HAZARDOUS
PROPERTIES OF FLAMMABLE LIQUIDS AS SUGGESTED BY THE NATIONAL FIRE
PROTECTION AOCIATION.

Respiratory Protection:ORGANIC VAPOR RESPIRATOR WITH PARTICULATE FILTER
APPROVED BY NIOSH
Ventilation:LOCAL EXHAUST AND MECHANICAL
Protective Gloves:BUTYL RUBBER
Eye Protection:SPECTACLES W/SIDE SHIELDS
Other Protective Equipment:NONE
Supplemental Safety and Health
MSDS DATED: NOV 1985. ALSO CONTAINS: (1000034AA) ALIPHATIC ACIDS .1-1%.

Boiling Pt:B.P. Text:246-385F
Vapor Pres:15
Vapor Density:4.9
Spec Gravity:.89
Evaporation Rate & Reference:(ETHER = 1) 70
Solubility in Water:INSOLUBLE
Appearance and Odor:WATER WHITE AND CHARACTERISTIC PETROLEUM ODOR.
Percent Volatiles by Volume:50%

Stability Indicator/Materials to Avoid:YES
NONE
Stability Condition to Avoid:EXCESSIVE HEAT
Hazardous Decomposition Products:CO, NOX
Conditions to Avoid Polymerization:AVOID SOURCE OF
IGNITION/FLAME/STATIC/ELEC/HEAT/ELEC SPARK.

Waste Disposal Methods:DISPOSE AS PAINT WASTE IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.