Product ID:COPALTITE
MSDS Date:07/20/1990
FSC:8030
NIIN:00-271-9273
MSDS Number: BMSLC

NATIONAL ENGINEERING PRODUCTS INC

5110 RIDGEFIELD ROAD SUITE 411
BETHESDA, MD 20816
US

Emergency Phone: 202-526-6274

Info Phone: 301-656-1688

Cage: 76641

NATIONAL ENGINEERING PRODUCTS INC

BETHESDA, MD 20816 US

Telephone: 202-526-6274

Cage: 76641

PHENOLIC RESIN

ACGIH TLV: 5 PPM, S (MFR)

CRESOL, ALL ISOMERS; (CRESYLIC ACID) (SARA III)

CAS: 1319-77-3

RTECS: GO5950000

Fraction By Weight: 20.0%

OSHA PEL 5 PPM, S

ACGIH TLV: 5 PPM, S

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

ETHYL ALCOHOL; (ETHANOL)

CAS: 64-17-5

RTECS: KQ6300000

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM

FORMALDEHYDE (SARA III)

CAS: 50-00-0

RTECS: LP8925000

Fraction By Weight: 0.40%

OSHA PEL SEE 1910.1048

ACGIH TLV: C 0.3 PPM; A2; 9293

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

METHYL ALCOHOL; (METHANOL) (SARA III)

CAS: 67-56-1

RTECS: PC1400000

Fraction By Weight: 10.0%

OSHA PEL S,200PPM/250STEL

ACGIH TLV: S,200PPM/250STEL; 93

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

WATER

CAS: 7732-18-5

RTECS: ZC0110000

BARIUM; (BARIUM COMPOUND) (SARA III)

CAS: 7440-39-3

RTECS: CQ8370000

Fraction By Weight: 2.50%

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG/M3

PHENOL (SARA III)

CAS: 108-95-2

RTECS: SJ3327000

Fraction By Weight: 2.0%

OSHA PEL 5 PPM, S

ACGIH TLV: 5 PPM, S

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:SKIN:SEVERE IRRITATION, MARKED LOCAL
REDNESS. INHAL:DIZZINESS, DROWSINESS, TINGLING AND PAINS IN HANDS
AND ARMS. EYES:SEVERE IRRITATION, MARKED REDNESS AND SWELLING OF
CONJUNCTIVA AND CHEMICAL BURNS O F THE CORNEA.
Explanation of Carcinogenicity:FORMALDEHYDE:GROUP 2 (NTP), GROUP 2A
(IARC), OSHA-REGULATED.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ASTHMA-FROM INHALATION.
DERMATITIS-FROM SKIN CONTACT.

First Aid:INGEST:INDUCE VOMITING. CALL MD. SKIN:REMOVE CONTAMINATED
CLOTHING AND WASH WITH SOAP AND WATER. EYES:FLUSH WITH WATER FOR AT
LEAST 15 MINUTES AND SEE OPTHALMOLOGIST. INHAL:REMOVE VICTIM TO
FRESH AIR.

Flash Point Method:TOC
Flash Point:>190F,>88C
Lower Limits:6.7%
Upper Limits:36%
Extinguishing Media:USE CARBON DIOXIDE OR DRY CHEMICALS ON SMALL FIRE.
FOAM OR WATER FOG ON LARGE FIRES.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:MATERIAL CAN POLYMERIZE RAPIDLY AND
RUPTURE CONTAINERS.

Spill Release Procedures:WEAR PROTECTIVE CLOTHING AND COLLECT FOR
DISPOSAL. DO NOT DISCHARGE TO WATERWAYS. DO NOT USE ON PLUMBING
USING DRINKING WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP AWAY FROM HEAT AND OPEN FLAME.
STORE AT 72F OR LESS TO MAINTAIN USEFULNESS OF PRODUCT.
Other Precautions:AVOID CONTACT WITH EYES OR SKIN. WEAR GLOVES. WASH IF
CONTACT IS MADE WITH SKIN. USE WITH ADEQUATE VENTILATION. DO NOT
CONTAMINATE GROUND WATER.

Respiratory Protection:IN HIGH CONCENTRATIONS USE NIOSH/MSHA APPROVED
SELF-CONTAINED BREATHING APPARATUS.
Ventilation:LOCAL EXHAUST MAY BE NECESSARY FOR PROPER CONTROL OF PHENOL
AND FORMALDEHYDE VAPORS BELOW THEIR THRESHOLD LIMIT.
Protective Gloves:RUBBER OR PLASTIC GLOVES.
Eye Protection:MONOGOGGLES. CHEM WORKERS GOGGLES
Other Protective Equipment:CHEMICAL APRON, EYE BATH, SAFETY SHOWER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPEC GRAVITY:1.035-1.065 (H*2O = 1).

Boiling Pt:B.P. Text:181F,83C
Melt/Freeze Pt:M.P/F.P Text:<32F,<0C
Vapor Pres:-46
Vapor Density:-2.3
Spec Gravity:SEE ING
Evaporation Rate & Reference:-4 SOLV PORTION (BU AC=1)
Solubility in Water:7 AT 20C
Appearance and Odor:RED-BROWN LIQUID WITH SLIGHT METHANOL ODOR.

Stability Indicator/Materials to Avoid:YES
ALKALI METALS, CONC NITRIC AND SULFURIC ACIDS, ACYL HALIDES, ALDEHYDES
AND HALOGENS.
Stability Condition to Avoid:KEEP AWAY FROM EXTREME HEAT DURING STORAGE
AND SHIPPING.
Hazardous Decomposition Products:CO, CO*2 AND CRESOL VAPORS.
Conditions to Avoid Polymerization:WHEN EXPOSED TO EXTREME HEAT SUCH AS
FIRE, MATERIAL CAN REACT AND RUPTURE CONTAINER.

Waste Disposal Methods:INCINERATE IN A FURNACE WHERE LOCAL, STATE AND
FEDERAL REGULATIONS ALLOW.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.