Product ID:ZL-24 ZYGLO PENETRANT
MSDS Date:01/01/1985
FSC:6850
NIIN:00D000320
MSDS Number: BBCMJ

Emergency Phone: 312-867-8000

Cage: 37676

Telephone: 847-657-5300/

Cage: 37676

INERT INGREDIENTS(TYPE NOT SPECIFIED)

Fraction By Weight: 100%

ACGIH TLV: 200 PPM

Effects of Overexposure:DIZZINESS,SKIN EXPOSURE IS MOST COMMON PROBLEM
AS MATERIAL CAN DRY & CRACK SKIN ON CONSTANT EXPOSURE

First Aid:REMOVE TO FRESH AIR.

Flash Point:229F PMCC
Lower Limits:1.0
Upper Limits:6.0
Extinguishing Media:DRY CHEMICAL,FOAM,CO*2
Fire Fighting Procedures:NONE

Spill Release Procedures:SOAK UP WITH SWEEPINGCOMPOUND & COLLECT.

Handling and Storage Precautions:KEEP CONTAINER CLOSED & AWAY FROM
HEAT.
Other Precautions:IF EXPOSURE IS FREQUENT,WEAR IMPERVIOUS GLOVES.REMOVE
CLOTHING SOAKED IN ZL-24.

Respiratory Protection:NOT NORMALLY NEEDED BECAUSE OF LOW VOLATILITY.
Ventilation:LOCAL EXHAUST IF MATERIAL IS SPRAYED.
Protective Gloves:RUBBER.
Other Protective Equipment:FILTER TYPE RESPIRATOR TO TRAP MIST IF
SPRAYED IN UNVENT.SPC
Supplemental Safety and Health

HCC:N1
Boiling Pt:B.P. Text:>400F
Vapor Pres:0.2
Vapor Density:UNK
Spec Gravity:0.93
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GREEN OILY LIQUID,PINE ODOR.
Percent Volatiles by Volume:5.0.

Stability Indicator/Materials to Avoid:YES
MAY SOFTEN OR STAIN RUBBER & PLASTICS.

Waste Disposal Methods:INCINERATE IN AN APPROVED INCINERATOR UNDER
APPROVED CONTROLLED OPERATING PROCEDURES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.