BBCMN - ZL-60B ZYGLO WATER WASHABLE PENETRANT
- MSDS: BBCMN
- Manufacturer: MAGNAFLUX CORP
- Product Name: ZL-60B ZYGLO WATER WASHABLE PENETRANT
- National Stock Number: 6850-00D000325
Product Identification
Product ID:ZL-60B ZYGLO WATER WASHABLE PENETRANT
MSDS Date:01/01/1987
FSC:6850
NIIN:00D000325
MSDS Number: BBCMN
Responsible Party
CHICAGO, IL 60656
US
Emergency Phone: 312-867-8000
Info Phone: 312-867-8000
Cage: 37676
Contractor
Telephone: 847-657-5300/
Cage: 37676
Ingredients
ALIPHATIC HYDROCARBONS
Fraction By Weight: 70.0%
ACGIH TLV: 500 PPM
ETHOXYLATED FATTY ALCOHOLS
Fraction By Weight: 20.0%
FLUORESCENT DYES
Fraction By Weight: 1.0%
TERPINEOL
CAS: 8006-39-1
RTECS: WZ6600000
Fraction By Weight: 10.0%
Hazards
Effects of Overexposure:DIZZINESS, DROWSINESS,NAUSEA
First Aid
First Aid:REMOVE TO FRESH AIR.
Fire Fighting
Flash Point Method:CC
Flash Point:>93.3C, 200.F
Lower Limits:1.0
Upper Limits:6.0.
Extinguishing Media:FOAM, CO*2
Fire Fighting Procedures:NONE
Accidental Release
Spill Release Procedures:PICK UP WITH ABSORBENT SWEEPING COMPOUND,OR
FLUSH AWAY WITH WATER.
Handling
Handling and Storage Precautions:STORE IN DRY AREA-WASH MATERIAL OFF
EXPOSURE-WEAR PROTECTIVE GLOVES IF EXPOSURE IS UNAVOIDABLE
Other Precautions:REMOVE CLOTHING SOAKED WITH PENETRANT.
Exposure Controls
Ventilation:LOCAL EXHAUST IF SPRAYED
Protective Gloves:RUBBER
Eye Protection:FACE SHIELD IF SPRAYED.
Other Protective Equipment:RUBBER APRON IF BODY CONTACT IS UNAVOIDABLE.
Supplemental Safety and Health
QPL-25135-13, 6AUG73 DID NOT SHOW THE PRODUCTS ZL-60 & ZL-60B AS
QUALIFIED PRODUCTS FOR MIL-I-25135C;BUT MANUFACTURER STATED THAT
THESE PRODUCTS MET GROUP IV,V&/OR VI OF MIL-I-25135C
REQUIREMENTS;SERV ICES MAY HAVE PROCURED LOCALLY;ITEM ZL-60 WAS
UNDER 6850-00-D00-0326 WITH NO COMPONENTS AT ALL,NOW DELETED ON
4/14/88.
Chemical Properties
HCC:V5
Boiling Pt:=204.4C, 400.F
Vapor Pres:1.0
Spec Gravity:0.88
Solubility in Water:APPRECIABLE
Appearance and Odor:GREEN LIQUID, BLAND OILY ODOR.
Percent Volatiles by Volume:10.0
Stability
Stability Indicator/Materials to Avoid:YES
MAY SOFTEN OR STAIN RUBBER,PLASTICS,ORGANIC COATINGS.
Hazardous Decomposition Products:NONE
Disposal
Waste Disposal Methods:INCINERATE IN AN APPROVED INCINERATOR UNDER
APPROVED CONTROLLED OPERATING PROCEDURES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.