BBCMR - ZP-9C,ZYGLO DEVELOPER(AEROSOL)
- MSDS: BBCMR
- Manufacturer: MAGNAFLUX CORP
- Product Name: ZP-9C,ZYGLO DEVELOPER(AEROSOL)
- National Stock Number: 6850-00D000334
Product Identification
Product ID:ZP-9C,ZYGLO DEVELOPER(AEROSOL)
MSDS Date:01/01/1985
FSC:6850
NIIN:00D000334
MSDS Number: BBCMR
Responsible Party
CHICAGO, IL 60656-3504
US
Emergency Phone: 312-867-8000
Info Phone: 312-867-8000
Cage: 37676
Contractor
Telephone: 847-657-5300/
Cage: 37676
Ingredients
METHYLENE CHLORIDE (SARA III)
CAS: 75-09-2
RTECS: PA8050000
Fraction By Weight: 55.0%
OSHA PEL 500 PPM/C,1000; Z2
ACGIH TLV: 50 PPM, A2; 9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE) (SARA III)
CAS: 71-55-6
RTECS: KJ2975000
Fraction By Weight: 35.0%
OSHA PEL 350 PPM/450 STEL
ACGIH TLV: 350 PPM/450STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
CALCIUM PROPIONATE;CAS #63916-11-0
CAS: 56744-45-7
RTECS: UE8500000
Fraction By Weight: 5.0%
CARBON DIOXIDE
CAS: 124-38-9
RTECS: FF6400000
Fraction By Weight: 5.0%
OSHA PEL 5000 PPM
ACGIH TLV: 5000PPM/30000STEL;93
Hazards
Effects of Overexposure:CAUSES DIZZINES,DROWZINESS,NAUSEA
First Aid
First Aid:REMOVE TO FRESH AIR. GIVE CPR/OXYGEN IF NEED. SKIN:WASH WITH
SOAP & WATER. EYES:FLUSH WITH WATER 15 MIN. KEEP WARM AND QUIET
!
Fire Fighting
Flash Point:NONE
Extinguishing Media:CO*2, FOAM, DRY CHEM.
Unusual Fire/Explosion Hazard:ZP-9C VAP CAN DECOMPOSE TO TOXIC GASES
WHEN EXPOSED TO FLAME,ARC,RED HOT SURFACES.
Accidental Release
Spill Release Procedures:EVACUATE UNPROTECTED PERSONS. STOP LEAK. H*2O
SPRAY TO COOL CONT/DIVERT SPILL FROM FIRE/HEAT. PROVIDE
VENTILATION. ABSORB W COMMERCIAL ABSORBENT,SHOVEL INTO METAL DRUMS.
LG SPILL:DIKE W COMMERCIAL ABS ORBENT, PUMP INTO COVERED DRUMS.
Handling
Handling and Storage Precautions:STORE BELOW 120F,KEEP CONTAINERS DRY.
Other Precautions:NONE KNOWN
Exposure Controls
Respiratory Protection:NONE SHOULD BE NEEDED
Ventilation:LOCAL EXHAUST(SPRAY BATH)
Protective Gloves:AS REQUIRED
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
MSDS FM MFR DATED 10/19/81;THIS FORMULATION ONLY FOR AEROSOL
PRODUCT;SEE NSN 6850009635401 FOR NON-AEROSOL PRODUCT;
Chemical Properties
HCC:V2
Boiling Pt:=38.9C, 102.F
Vapor Pres:720
Vapor Density:4
Spec Gravity:1.3
Evaporation Rate & Reference:2 (ETHER=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:MIXTURE IN CANS:CLOUDY LIQUID,WHITE SEDIMENT
Stability
Stability Indicator/Materials to Avoid:YES
WILL SOFTEN MANY PLASTICS,RUBBERS,COATINGS
Stability Condition to Avoid:USING NEAR OPEN FLAME,ARCS,RED HOT
SURFACES
Hazardous Decomposition Products:AT HIGH TEMPERATURE HYDROGEN CHLORIDE
& PHOSEGENE.
Disposal
Waste Disposal Methods:KEEP IN COVERED DRUMS,PENDING DISPOSAL. HANDLE &
DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE, & LOCAL REGULATIONS. EMPTY CANS NEED
NOT BE CLASSED AS HAZ WASTE,PER MFR.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.