BBFZR - EA 9309.3 PART A
- MSDS: BBFZR
- Manufacturer: DEXTER CORP HYSOL DIV
- Product Name: EA 9309.3 PART A
- National Stock Number: 8040-00F000165
Product Identification
Product ID:EA 9309.3 PART A
MSDS Date:01/01/1985
FSC:8040
NIIN:00F000165
MSDS Number: BBFZR
Responsible Party
Emergency Phone: 415/467-4201
Cage: 79436
Contractor
Telephone: 202-483-7616
Cage: 33564
Ingredients
EPOXY RESIN SYSTEM
MICA - SILICATES (< 1% CRYSTALLINE SILICA)
CAS: 12001-26-2
RTECS: VV8760000
Fraction By Weight: <07%
OSHA PEL 20 MPPCF
ACGIH TLV: 3 MG/M3 RDUST; 9293
ASBESTOS (AMIANTHUS, OBSOLETE AMOSITE), (FOR OSHA PEL, SEE
CAS: 1332-21-4
RTECS: CI6475000
Fraction By Weight: 2%
OSHA PEL 0.2 FIBERS/CC
ACGIH TLV: 0.5 FIBERS/CC; A1;89
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
Effects of Overexposure:CAUTION. MAY CAUSE SKIN AND EYE IRRITATION
First Aid
First Aid:IF CONTACT OCCURS, WASH SKIN WITH SOAP AND WATER. FLUSH EYES
IMMEDIATELY WITH PLENTY OF WATER.
Fire Fighting
Flash Point:>200F TCC
Extinguishing Media:WATER SPRAY, CHEMICAL FOAM, DRY CHEMICALS
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:SCRAPE OFF EXCESS THEN CLEAN WITH SOLVENTS.
Handling
Handling and Storage Precautions:FOLLOW RECOMMENDED STORAGE CONDITIONS.
Exposure Controls
Respiratory Protection:APPROVED NIOSH RESPIRATOR AND MASK FOR ASBESTOS*
Ventilation:LOCAL EXHAUST HIGHLY RECOMMENDED
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES
Other Protective Equipment:*THIS IS NOT NECES. UNLESS CURED ADHESIVE
ISDRY SANDED, ETC.
Supplemental Safety and Health
2850 WILLOW PASS ROAD P.O. BOX 312, PITTSBURG, CALIFORNIA 94565.
Chemical Properties
Boiling Pt:B.P. Text:DECOMPOSES
Vapor Pres:0.3
Vapor Density:5
Spec Gravity:1.1
Evaporation Rate & Reference:<0.1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VISCOUS BEIGE PASTE
Percent Volatiles by Volume:<1
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:CO, ALDEHYDES, ACIDS, ETC.
Conditions to Avoid Polymerization:EXOTHERMS WHEN USED WITH CURING
AGENT.
Disposal
Waste Disposal Methods:LANDFILL OR CONTROLLED BURNING AS REGULATED BY
ALL GOVERNMENTAL AGENCIES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.