BBGYV - SAFETY-KLEEN 140 SOLVENT

  • MSDS: BBGYV
  • Manufacturer: SAFETY KLEEN CORP
  • Product Name: SAFETY-KLEEN 140 SOLVENT
  • National Stock Number: 6810-00F014954
Product Identification

Product ID:SAFETY-KLEEN 140 SOLVENT
MSDS Date:01/01/1985
FSC:6810
NIIN:00F014954
MSDS Number: BBGYV

Responsible Party
SAFETY-KLEEN CORP.

Emergency Phone: 312 697-8460

Cage: 30530

Contractor
SAFETY-KLEEN CORP
COLUMBIA, SC 29201 US

Telephone: 1-803-933-4200

Cage: 30530

Ingredients

ANTIC-STATIC ADDITIVE


DYE

Fraction By Weight: .003%

ACGIH TLV: 100 PPM


140 SOLVENT

Fraction By Weight: 100%

ACGIH TLV: 100 PPM

Hazards

Effects of Overexposure:SEVERE EYE IRRITATION-DRYING OF SKIN-EXCESSIVE
INHALATION CAUSES HEADACHES, DIZZINESS & NAUSEA.

First Aid

First Aid:EYE CONTACT: FLUSH WITH WATER. SKIN CONTACT: WASH WITH MILD
SOAP/WATER AND APPLY SKIN CREAM. INHALATION: REMOVE TO FRESH AIR
AND CALL A PHYSICIAN; APPLY ARTIFICIAL RESPIRATION IF NECESSARY IN
EXTREMES . INGESTION: DO NOT INDUCE VOMITING.

Fire Fighting

Flash Point:142F TCC
Lower Limits:1.0
Upper Limits:7.0
Extinguishing Media:CO2 FOAM, DRY CHEMICAL, WATER (MIST ONLY)
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:CATCH AND COLLECT FOR RECOVERY AS SOON AS
POSSIBLE. AVOID EXPOSURE TO SPARKS, FIRE OHOT METAL SURFACES.

Handling

Handling and Storage Precautions:COMBUSTIBLE. KEEP AWAY FROM HEAT,
SPARKS AND OPEN FLAME. USE ADEQUATE VENTILATION. AVOID LONG PEATED
CONTACT WITH SKIN.

Exposure Controls

Respiratory Protection:SELF-CONTAINED BREATHING APPARATUS FOR
CONCENTRATIONS ABOVE TLV.
Ventilation:LOCAL EXHAUST
Protective Gloves:B ARRIER CREAM.
Eye Protection:YES
Supplemental Safety and Health
SAFETY-KLEEN CORP. 655 BIG TIMBER ROAD. ELGIN, ILLINOIS 60120.
%AROMATICS (TOTAL) LESS THAN 8.0%.

Chemical Properties

Boiling Pt:B.P. Text:360-410F
Vapor Pres:68F
Vapor Density:5.48
Spec Gravity:0.779
Evaporation Rate & Reference:0.02
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR GREEN
Percent Volatiles by Volume:100%

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME AND FIRE.
Hazardous Decomposition Products:INCOMPLETE BURNING MAY YIELD CARBON
MONOXIDE.

Disposal

Waste Disposal Methods:DISPOSE OR IN ACCORDANCE WITH COMPANY OR LOCAL,
STATE AND FEDERAL REGULATIONS. INCINERATE UNDER SAFE CONDITIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.