BBLRB - KRYLON FLUORESCENT SPRAY PAINT 3104

  • MSDS: BBLRB
  • Manufacturer: BORDEN INC KRYLON DEPARTMENT
  • Product Name: KRYLON FLUORESCENT SPRAY PAINT 3104
  • National Stock Number: 8010-00F002759
Product Identification

Product ID:KRYLON FLUORESCENT SPRAY PAINT 3104
MSDS Date:01/01/1985
FSC:8010
NIIN:00F002759
MSDS Number: BBLRB

Responsible Party
BORDEN, INC., KRYLON DEPARTMENT

Emergency Phone: 215/278-2400 OR 245

Cage: EO430

Contractor
KRYLON PRODUCTS
SOLON, OH 44139 US

Telephone: 800-832-2541/216-566-2917

Cage: 87187

Ingredients

ACRYLIC ESTER RESIN

Fraction By Weight: 5.8%


PROPANE/ISOBUTANE

CAS: 75-28-5

RTECS: TZ4300000

Fraction By Weight: 28%

ACGIH TLV: 1000


HEXANE (N-HEXANE)

CAS: 110-54-3

RTECS: MN9275000

Fraction By Weight: 18%

OSHA PEL 500 PPM

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


N-HEPTANE

CAS: 142-82-5

RTECS: MI7700000

Fraction By Weight: 15%

OSHA PEL 500 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9293


TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 14 - 21%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Effects of Overexposure:DIZZINESS, CONFUSION, WEAKNESS

First Aid

First Aid:GET FRESH AIR. IF SPRAYED IN EYES, WASH WITH WATER FOR 15
MINUTES.

Fire Fighting

Extinguishing Media:SOLVENT FIRE CLASS B MEDIA
Fire Fighting Procedures:SPRAY CAN BURN LIKE BLOWTORCH;RELEASE BUTTON
TO EXTINGUISH.
Unusual Fire/Explosion Hazard:CAN MAY BURST WITH VIOLENCE IF IN A
FIRE;THIS WILL RELEASE ITS FLAMMABLE CONTENT.

Accidental Release

Spill Release Procedures:REMOVE SOURCES OF IGNITION. SOAK UP WITH
ABSORBENT MATERIAL. VENTILATE AREA.

Handling

Handling and Storage Precautions:DO NOT STORE AT TEMPERATURES OVER
120F. CONTENTS UNDER PRESSURE AND EXPOSURE TO HIGH TEMP MAY USE
BURSTING. AVOID ANY HEAT SOURCE.
Other Precautions:INCINERATION WILL CAUSE CONTAINER TO BURST VIOLENTLY.
AVOID INCINERATION OR USE ONLY A STRONG, CLOSED CONTAINER. AVOID
PUNCTING. IF SPRAY IS BURNED DO NOT BREATHE IRRITATING FUMES.

Exposure Controls

Respiratory Protection:VENTILATE ADEQUATELY
Ventilation:SUPPLY NATURAL VENTILATION AS NEEDED TO KEEP BELOW TLV.
Protective Gloves:NOT NEEDED
Eye Protection:DESIRABLE;NOT MANDATORY
Supplemental Safety and Health
ALSO CONTAINS 8% VM&P NAPHTHA TLV 200PPM.

Chemical Properties

Vapor Density:>1
Spec Gravity:<1
Evaporation Rate & Reference:>1
Solubility in Water:SLIGHT
Percent Volatiles by Volume:82.4

Stability

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:TOXIC AND IRRITATING COMPOUNDS IF
BURNED.

Disposal

Waste Disposal Methods:WHEN DRY, DISCARD AS NON-DANGEROUS TRASH TO BE
BURIED OR BURNED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.