Product ID:NO2200 SERIES PURE NI ALLOY
MSDS Date:01/01/1987
FSC:3439
NIIN:00F003940
MSDS Number: BBPDB

A.M. CASTLE/FRANKLIN PARK, IL 60131

Emergency Phone: (312) 455-7111

Cage: 11045

CASTLE A M AND CO

FRANKLIN PARK, IL 60131-1319 US

Telephone: 847-455-7111

Cage: 11045

CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

Fraction By Weight: <2%

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

MANGANESE (SARA III)

CAS: 7439-96-5

RTECS: OO9275000

Fraction By Weight: <5%

OSHA PEL (C) 5 MG/M3 DUST

ACGIH TLV: 5 MG/M3 DUST 9293

NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

Fraction By Weight: 99%

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9192

TITANIUM

CAS: 7440-32-6

RTECS: XR1700000

Fraction By Weight: <5%

ACGIH TLV: 10 MG/CUM

TUNGSTEN

CAS: 7440-33-7

RTECS: YO7175000

Fraction By Weight: <5%

OSHA PEL 5 MG/M3/ 10 STEL

ACGIH TLV: 5 MG/M3/10 STEL;9192

Effects of Overexposure:SHORT TERM EXPOSURE TO FUMES/DUST MAY PRODUCE
IRRITATION OF EYES/RESPIRATORY SYSTEM.

First Aid:IF EXPOSED TO EXCESSIVE LEVELS OF METAL FUMES, REMOVE TO
FRESH AIR, SEEK MEDICAL AID IMMEDIATELY. EYES: FLUSH WITH WATER FOR
AT LEAST 15 MINUTES.

Fire Fighting Procedures:STEEL PRODUCTS IN THE SOLID STATE PRESENT NO
FIRE/EXPLOSION.

Handling and Storage Precautions:IN WELDING, PRECAUTIONS SHOULD BE
TAKEN FOR AIRBORNE CONTAMINANTS WHICH MAY ORIGINATE FROM COMNENTS
OF THE WELDING ROD.
Other Precautions:ARC OR SPARK GENERATED WHEN WELDING OR BURNING COULD
BE A SOURCE OF IGNITION FOR COMBUSTABLE AND FLAMMABLE MATERIALS.

Respiratory Protection:NIOSH/MSHA APPROVED DUST/FUME, RESP SHOULD BE
USED WHEN EXCEED TLV'S
Ventilation:LOCAL EXHAUST VENTILATION TO KEEP BELOW TLV'S
Eye Protection:SAFETY GLASSES OR GOGGLES
Other Protective Equipment:OTHER PROTECTIVE EQUIPMENT SHOULD BE
UTILIZED AS REQUIRED.
Supplemental Safety and Health
MSDS DATED: 25 NOV 1985. MELTING POINT: >2300.

Spec Gravity:Y
Appearance and Odor:GRAY-BLACK, ODORLESS

Stability Indicator/Materials to Avoid:YES
REACTS WITH STRONG ACIDS TO PRODUCE HYDROGEN GAS.
Hazardous Decomposition Products:FUMES MAY BE PRODUCED DURING
WELDING/BURNING/GRINDING

Waste Disposal Methods:ACCORDING TO LOCAL, STATE AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.