BBPGS - COPPER LEADTEX SHEET
- MSDS: BBPGS
- Manufacturer: A M CASTLE
- Product Name: COPPER LEADTEX SHEET
- National Stock Number: 3439-00F003998
Product Identification
Product ID:COPPER LEADTEX SHEET
MSDS Date:01/01/1987
FSC:3439
NIIN:00F003998
MSDS Number: BBPGS
Responsible Party
Emergency Phone: (312) 455-7111
Cage: 11045
Contractor
Telephone: 847-455-7111
Cage: 11045
Ingredients
LEAD (SARA III)
CAS: 7439-92-1
RTECS: OF7525000
OSHA PEL 0.05 MG/M3;1910.1025
ACGIH TLV: 0.15 MG/M3;DUST 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
COPPER (SARA III)
CAS: 7440-50-8
RTECS: GL5325000
Fraction By Weight: 99.9%
OSHA PEL 0.1MG/M3 FUME/1 DUST
ACGIH TLV: 0.2MG/M3 FUME; 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Effects of Overexposure:SHORT TERM EXPOSURE TO FUMES/DUST MAY PRODUCE
IRRITATION OF EYES AND RESPIRATORY SYSTEM.
First Aid
First Aid:IF EXPOSED TO EXCESSIVE LEVELS OF METAL FUMES, REMOVE TO
FRESH AIR, SEEK MEDICAL AID IMMEDIATELY. EYES: FLUSH WITH WATER FOR
AT LEAST 15 MINUTES.
Fire Fighting
Lower Limits:N/K'
Fire Fighting Procedures:PRODUCTS IN THE SOLID STATE PRESENT NO FIRE OR
EXPLOSION.
Unusual Fire/Explosion Hazard:DUST DISPERSION IN AIR AND STRONG
IGNITION SOURCE MAY RESULT IN AN EXPLOSION.
Accidental Release
Spill Release Procedures:ARC OR SPARK GENERATED WHEN WELDING OR BURNING
COULD BE A SOURCE OF IGNITION FOR COMSTABLE AND FLAMMABLE
MATERIALS.
Handling
Handling and Storage Precautions:IN WELDING, PRECAUTIONS SHOULD BE
TAKEN FOR AIRBORNE CONTAMINANTS WHICH MAY ORIGINATE FROM COMNENTS
OF THE WELDING ROD.
Exposure Controls
Respiratory Protection:NIOSH/MSHA-APPROVED DUST/FUME, RESP SHOULD BE
USED WHEN EXCEED TLV'S
Ventilation:LOCAL EXHAUST VENTILATION SHOULD BE UTILIZED WHEN SAWING
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:SHOULD BE UTILIZED AS REQUIRED BY THE
WELDING STANDARDS.
Supplemental Safety and Health
MSDS DATED: 25 NOV 1985. MELTING POINT: >1800. ALSO CONTAINS: TRACE
LESS THAN .1% PHOSPHORUS, ANTIMONY, SELENIUM BISMUTH.
Chemical Properties
Spec Gravity:>8
Appearance and Odor:COPPER METALLIC, ODORLESS
Stability
Stability Indicator/Materials to Avoid:YES
MERCURY, AMMONIA, ACETYLENE, ACIDS
Stability Condition to Avoid:EXPOSURE DURING STORAGE TO STRONG
ACIDS/BASES/OXIDIZING AGTS
Hazardous Decomposition Products:TOXIC GASES/AEROSOLS/VAPORS MAY BE
RELEASED IN A FIRE
Disposal
Waste Disposal Methods:ACCORDING TO LOCAL, STATE AND FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.