Product ID:S'GL LATEX WHITE, SL3901
MSDS Date:01/01/1987
FSC:8010
NIIN:00F004871
MSDS Number: BBRFT

TECHNICAL COATINGS/LUBBOCK, TX 79417

Emergency Phone: (806) 762-5848

Cage: 1HW18

TECHNICAL COATINGS/LUBBOCK, TX 79417

Cage: 1HW18

INORGANIC MERCURY COMPOUND

Fraction By Weight: <5%

OSHA PEL S, C, 0.1 MG/M3

ACGIH TLV: S, 0.1 MG/M3; 8990

ETHYLENE GLYCOL (SARA III)

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: <5%

OSHA PEL C 50 PPM

ACGIH TLV: C 50 PPM,VAPOR; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

TEXANOL (2,2,4-TRIMETHYL-1,3-PENTANEDIOL MONOISOBUTYRATE)

CAS: 25265-77-4

RTECS: UF6000000

Fraction By Weight: <5%

AMMONIA (SARA III)

CAS: 7664-41-7

RTECS: BO0875000

Fraction By Weight: <5%

OSHA PEL 50 PPM

ACGIH TLV: 25 PPM/35 STEL; 9293

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

Effects of Overexposure:RESPIRATORY TRACT
IRRITATION/HEADACHE/DIZZINESS/STAGGERING
WALK/CONFUSION/UNCONSCIOUSNESS OR COMA.

First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH W/WATER FOR AT
LEAST 15 MINS. TAKE TO A PHYS FOR MED TREATMENT. SKIN: REMOVE
W/SOAP & WATER. REMOVE CONTAMINATED CLOTHING. INGESTION: DRINK 1 OR
2 WATER. D ON'T INDUCE VOMITING. CONSULT PHYSICIAN.

Extinguishing Media:CO2, DRY CHEMICAL OR FOAM
Fire Fighting Procedures:FIREFIGHTERS SHOULD BE EQUIPPED
W/MASKS/SELF-CONTAINED RESP.
Unusual Fire/Explosion Hazard:WATER SPRAY WILL BE EFFECTIVE/WATER COOL
CONTAINERS. CONTAINERS MAY EXPLODE DUE TO HEAT.

Spill Release Procedures:REMOVE WITH AN INERT ABSORBENT.

Handling and Storage Precautions:DON'T STORE >120F. DON'T TAKE
INTERNALLY.

Ventilation:PROVIDE GENERAL DILUTION OR LOCAL EXHAUST VENTILATION
Protective Gloves:RUBBER
Eye Protection:USE SAFETY EYEWEAR
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT TO
CONTAMINATED CLOTHING.
Supplemental Safety and Health
MSDS DATE: 12/18/86. WEIGHT PER GALLON(POUNDS): 10.68.

Boiling Pt:B.P. Text:212-490F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:60.8

Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS
Hazardous Decomposition Products:NONE
Conditions to Avoid Polymerization:EXTREME HEAT

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS. INCINERATE IN APPROVED FACILITY. DON'T
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.