BBRPN - (FORMERLY P10 PART B) TS0003 PART B

  • MSDS: BBRPN
  • Manufacturer: HYSOL DIV THE DEXTER CORP
  • Product Name: (FORMERLY P10 PART B) TS0003 PART B
  • National Stock Number: 6850-00F005036
Product Identification

Product ID:(FORMERLY P10 PART B) TS0003 PART B
MSDS Date:01/01/1987
FSC:6850
NIIN:00F005036
MSDS Number: BBRPN

Responsible Party
HYSOL DIV, THE DEXTER CORP/OLEAN, NY 14760

Emergency Phone: (716) 372-6300

Cage: EO987

Contractor
HYSOL DIV, THE DEXTER CORP/OLEAN, NY 14760
OLEAN, NY 14760-1297 US

Telephone: 716-372-6300/6309

Cage: EO987

Ingredients

ISOPROPYL ALCOHOL (SARA III)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 66%

OSHA PEL 400 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9192


PHOSPHORIC ACID (SARA III)

CAS: 7664-38-2

RTECS: TB6300000

Fraction By Weight: 18%

OSHA PEL 1 MG/M3/3 STEL

ACGIH TLV: 1 MG/M3/3 STEL; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

Effects of Overexposure:DIZZINESS, RESPIRATORY IRRITATION

First Aid

First Aid:REMOVE TO FRESH AIR.

Fire Fighting

Flash Point:65F (TOC)
Lower Limits:2.3%
Upper Limits:12.8
Extinguishing Media:WATER SPRAY, DRY CHEMICALS, CO2
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:REMOVE ALL IGNITION SOURCES. FLUSH HEAVILY
WITH WATER. DIKE LARGE SPILLS AND PUMP TOALVAGE CONTAINERS.

Handling

Handling and Storage Precautions:STORE AWAY FROM HEAT AND OPEN FLAME.
AVOID PROLONGED BREATHING OF VAPORS.
Other Precautions:AVOID UNNECESSARY EYE OR SKIN CONTACT.

Exposure Controls

Respiratory Protection:FRESH AIR MASK IN THE EVENT REGULAR VENTILATION
SYSTEM FAILS.
Ventilation:LOCAL EXHAUST: PREFERABLE & MECHANICAL: ACCEPTABLE
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES
Other Protective Equipment:RUBBER APRON
Supplemental Safety and Health
MSDS DATE: SEPT 16, 81.

Chemical Properties

Boiling Pt:B.P. Text:180F
Vapor Pres:32.
Vapor Density:2.07
Spec Gravity:.8
Evaporation Rate & Reference:(N-BU AC =1): 1.7
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR/LOW VISCOSITY LIQ/CHARACTERISTIC ALCOHOL
Percent Volatiles by Volume:66%

Stability

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO, CO2

Disposal

Waste Disposal Methods:INCINERATE IN FURNACE. SEE ALSO MANUFACTURING
CHEMISTS LABORATORY DISPOSAL MANUAL, SECOND EDITION, UNDER HEADING
OF ALCOHOLS. THIS IS AN IGNITABLE WASTE UNDER RCRA.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.