BBTWS - NICKEL BASE ALLOY 718
- MSDS: BBTWS
- Manufacturer: G AND S TITANIUM INC
- Product Name: NICKEL BASE ALLOY 718
- National Stock Number: 9535-00F006087
Product Identification
Product ID:NICKEL BASE ALLOY 718
MSDS Date:01/01/1987
FSC:9535
NIIN:00F006087
MSDS Number: BBTWS
Responsible Party
Emergency Phone: (216) 263-0564
Cage: FO168
Contractor
Telephone: (216) 263-0564
Cage: FO168
Ingredients
CHROMIUM (SARA III)
CAS: 7440-47-3
RTECS: GB4200000
Fraction By Weight: 18%
OSHA PEL 1 MG/M3
ACGIH TLV: 0.5 MG/M3; 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
MOLYBDENUM
CAS: 7439-98-7
RTECS: QA4680000
Fraction By Weight: 3%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3; 9293
TANTALUM
CAS: 7440-25-7
RTECS: WW5505000
Fraction By Weight: 5%
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3; DUST; 9192
IRON OXIDE
CAS: 1309-37-1
RTECS: NO7400000
Fraction By Weight: 19%
OSHA PEL 10 MG/M3 (FE)
ACGIH TLV: 5 MG/M3(FE),B2; 9293
NICKEL (SARA III)
CAS: 7440-02-0
RTECS: QR5950000
Fraction By Weight: 54%
OSHA PEL 1 MG/M3
ACGIH TLV: 1 MG/M3; 9192
Hazards
Effects of Overexposure:METALLIC TASTE/NAUSEA/TIGHTNESS OF
CHEST/FEVER/IRRIT OF EYES, NOSE, THROAT & SKIN.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. IF VICTIM IS UNCONSCIOUS,
ADMINISTER OXYGEN. SKIN: BRUSH OFF SKIN & CLOTHING. WASH W/SOAP &
WATER. CLEANSE WOUNDS. EYES: FLUSH WITH WATER. SEEK MEDICAL
ATTENTION. INGE STION: SEEK MEDICAL ATTENTION.
Fire Fighting
Flash Point:NONFLAMMABLE
Extinguishing Media:SAND, DOLOMITE, GRAPHITE POWDER, OR SODIUM
CHLORIDE.
Unusual Fire/Explosion Hazard:MODERATE FIRE & EXPLOSIVE HAZARD WHEN
EXPOSED TO HEAT, FLAME, ELECTRIC CURRENT, OR SPARK.
Accidental Release
Spill Release Procedures:RESIDUE FROM CUTTING OR GRINDING SHOULD BE
SWEPT OR VACUUMED & PLACE IN SUITABLE CONINERS.
_
_
Handling
Handling and Storage Precautions:PREVENT ACCUMULATION OF DUST,
GRINDINGS, ETC. THROUGH THE USE OF GOOD HOUSEKEEPING PRACTICES.
Exposure Controls
Respiratory Protection:IF TLV ARE EXCEEDED, USE OSHA APPROVED
RESPIRATOR.
Ventilation:PROVIDE EXHAUST VENTILATION TO KEEP
Other Protective Equipment:TO BE USED WHEN CUTTING, GRINDING, OR
WELDING.
Supplemental Safety and Health
MSDS UNDATED. ALSO CONTAINS: TITANIUM 1%. _
Chemical Properties
Solubility in Water:INSOLUBLE
Appearance and Odor:STEEL GRAY IN COLOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, CONCENTRATED NITRIC/CHROMIC ACIDS.
Disposal
Waste Disposal Methods:DISPOSAL BY LOCAL, STATE, OR FEDERAL DISPOSAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.