BBTYX - U-1202-D EPOXY PRIMER COMP B

  • MSDS: BBTYX
  • Manufacturer: STERLING LACQUER MFG CO INC
  • Product Name: U-1202-D EPOXY PRIMER COMP B
  • National Stock Number: 8010-00-082-2450
Product Identification

Product ID:U-1202-D EPOXY PRIMER COMP B
MSDS Date:12/01/1989
FSC:8010
NIIN:00-082-2450
MSDS Number: BBTYX

Responsible Party
STERLING LACQUER MFG CO INC
3150 BRANNON AVE
ST LOUIS, MO 63139-1422
US

Emergency Phone: (314) 776-4450

Info Phone: (314) 776-4450

Preparer: P. D. MOORE

Cage: 5G238

Contractor
STERLING LACQUER MFG CO INC
ST LOUIS, MO 63139-1422 US

Cage: 5G238

Ingredients

ISOPROPYL ALCOHOL (SARA III)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 50 - 75%

OSHA PEL 400 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9192


ETHYLENE GLYCOL PROPYL ETHER, EKTASOLVE EP

CAS: 2807-30-9

RTECS: KM2800000

Fraction By Weight: 21%


XYLENES (O-,M-,P- ISOMERS) (SARA III)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 5 - 10%

OSHA PEL 100 PPM/150 STEL

ACGIH TLV: 100 PPM/150STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


5.45 LBS/GAL (653 G/L)

RTECS: 9999999VO

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATION OF THE
RESPIRATORY TRACT, NOSE, THROAT, LUNGS/NARCOSIS. SKIN/EYES:
IRRITATION & INJURY TO TISSUE IF NOT PROPERLY REMOVED. INGESTION:
MODERATELY TOXIC, NAUSEA, VOMITING, & DIARRH EA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: IRRITATION TO THE RESPIRATORY
TRACT, NOSE, THROAT, LUNGS/NARCOSIS. SKIN/EYES: IRRITATION & INJURY
TO TISSUE IF NOTE REMOVED PROPERLY. INGESTION: MODERATELY TOXIC,
NAUSEA, VOMITING, & DIAR RHEA.
Medical Cond Aggravated by Exposure:RESPIRATORY PROBLEMS

First Aid

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN:
WASH THOROUGHLY W/SOAP & WATER. INHALATION: REMOVE TO FRESH AIR.
INGESTION: DON'T INDUCE VOMITING. OBTAIN MEDICAL ATTENTION IN ALL
CASES.

Fire Fighting

Flash Point Method:TCC
Flash Point:54F
Lower Limits:1.1%
Upper Limits:15.8%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL
Fire Fighting Procedures:WEAR SCBA W/FULL FACEPIECE OPERATED IN
PRESSURE-DEMAN. USE WATER FOG NOZZLES TO COOL CLOSED CONTAINER.
Unusual Fire/Explosion Hazard:DON'T WATER, FLAMMABLE LIQUID, CAN
RELEASE VAPORS THAT FORM FLAMMABLE MIXTURES AT TEMP AT OR ABOVE THE
FLASHPOINT. COMBUSTIBLE.

Accidental Release

Spill Release Procedures:WEAR RESPIRATOR, ABSORB WITH VERMICULITE OR
OTHER ABSORBENT MATERIAL. ELMINATE ALL IGNITION SOURCES. STOP SPILL
AT SOURCE, PREVENT SPREADING.

Handling

Handling and Storage Precautions:STORE IN DRY AREA. KEEP CONTAINERS
TIGHTLY CLOSED. PROTECT FROM PHYSICAL DAMAGE. EMPTIED CONTAINERS
RETAIN PRODUCT RESIDUES VAPOR/LIQUID/SOLID.
Other Precautions:STORE <120F. KEEP CLOSURE TIGHT/CONTAINER UPRIGHT TO
PREVENT LEAKAGE. DON'T GET IN EYES. KEEP AWAY FROM CHILDREN. AVOID
CONTACT W/SKIN. DON'T TAKE INTERNALLY. FOR INDUSTRIAL USE.

Exposure Controls

Respiratory Protection:IF >TLV, A NIOSH/MSHA APPROVED AIR SUPPLY
RESPIRATOR IS ADVISED IN ABSENCE OF PROPER ENVIRONMENTAL CONTROL.
OSHA REGS PERMIT OTHER NIOSH/MSHA RESPIRATORS UNDER SPECIFIED
CONDITIONS. IMPLEMENT ENGINEER ING OR ADMINISTRATIVE CONTROLS.
Ventilation:PROVIDE MECHANICAL (GENERAL)/LOCAL EXHAUST VENTILATION TO
KEEP Protective Gloves:SOLVENT RESISTANT
Eye Protection:SAFETY GLASSES, CHEMICAL SPLASH GOGGLES
Other Protective Equipment:SOLVENT IMPERVIOUS CLOTHING/BOOTS
Work Hygienic Practices:WASH W/SOAP & WATER AFTER USE, BEFORE EATING OR
SMOKING. REMOVE CONTAMINATED CLOTHING BEFORE REUSE.
Supplemental Safety and Health

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:179-301F
Vapor Pres:30
Vapor Density:>AIR
Spec Gravity:0.9
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR LIQUID, SOLVENT ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, SPARKS,FLAME, TEMPS >120F, & OTHER
SOURCES OF IGNITION.
Hazardous Decomposition Products:CO2, CO, & TOXIC GASES.

Disposal

Waste Disposal Methods:DESTROY BY LIQUID INCINERATION. CONTAMINATED
ABSORBENT MAY BE DEPOSITED IN A LANDFILL IN ACCORDANCE WITH LOCAL,
STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.