Product ID:CORLOY 1CRMO, 2CRMO, T-1, AWS A5.28
MSDS Date:01/01/1987
FSC:3439
NIIN:00F007327
MSDS Number: BBXSP

HOBART BROTHERS CO/TROY, OH 45373

Emergency Phone: (513) 339-6000

Cage: 28835

HOBART BROTHERS CO

TROY, OH 45373 US

Telephone: 513-339-6000

Cage: 28835

SILICON

RTECS: EW0400000

ACGIH TLV: 20 MG/CUM

COPPER (SARA III)

CAS: 7440-50-8

RTECS: GL5325000

OSHA PEL 0.1MG/M3 FUME/1 DUST

ACGIH TLV: 0.2MG/M3 FUME; 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

NICKEL (SEE SUPPLEMENTAL FOR INGREDIENTS)

RTECS: AR5950000

ACGIH TLV: 1 MG/CUM

CHROMIUM (SARA III)

CAS: 7440-47-3

RTECS: GB4200000

OSHA PEL 1 MG/M3

ACGIH TLV: 0.5 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

Effects of Overexposure:DIZZINESS, NAUSEA, DRYNESS, IRRITATION OF NOSE,
THROAT, EYES, DAMAGE TO LUNGS & ASTHAMA, KIDNEYS.

First Aid:EYE & SKIN: IF IRRITATION OR FLASH BURNS DEVELOP AFTER
EXPOSURE, CONSULT PHYSICIAN.

Flash Point:NON-FLAMMABLE
Unusual Fire/Explosion Hazard:WELDING ARC & SPARKS CAN IGNITE
COMBUSTIBLES.

Handling and Storage Precautions:ARC RAYS CAN INJURE EYE & BURN SKIN.
ELECTRIC SHOCK CAN KILL. TRAIN THE WELDER TO KEEP HIS HEAOUT OF THE
FUMES.
Other Precautions:TO DETERMINE THE COMPOSITION/QTY OF FUMES & GASES
TAKE AN AIR SAMPLE INSIDE THE WELDER'S HELMET OR IN BREATHING
OZONE.

Respiratory Protection:USE NIOSH APPROVED AIR SUPPLIED RESPIRATOR WHEN
WELDING IN CONFINED
Ventilation:USE LOCAL EXHAUST VENTILATION TO KEEP TLV
Protective Gloves:WELDER'S
Eye Protection:FACESHIELD W/FILTER LENS
Other Protective Equipment:ARM PROTECTORS, APRONS, HATS, SHOULDER
PROTECTION.
Supplemental Safety and Health
MSDS DATE: 8/85. ALSO CONTAINS: IRON, MANGANESE, MOLYBDENUM.

Stability Indicator/Materials to Avoid:YES
FE, MN, SI, TI, CR, NI, MO, CU, N
Hazardous Decomposition Products:CO, CO2, OZONE NOX. OXIDES OF FE/MN/S
I/TI/CR/NI/MO/CU/N.

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
WITH FEDERAL, STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.