Product ID:AWS A5.20 FCAW SHIELDCOR 8/4/11/GS
MSDS Date:01/01/1987
FSC:3439
NIIN:00F007330
MSDS Number: BBXSS

HOBART BROTHERS CO/TROY, OH 45373

Emergency Phone: (513) 339-6000

Cage: 28835

HOBART BROTHERS CO

TROY, OH 45373 US

Telephone: 513-339-6000

Cage: 28835

MAGNESIUM OXIDE

CAS: 1309-48-4

RTECS: OM3850000

OSHA PEL 15 MG/M3 PARTICULATE

ACGIH TLV: 10 MG/M3;TDUST; 9293

CALCIUM FLUORIDE

CAS: 7789-75-5

RTECS: EW1760000

OSHA PEL 2.5 MG/M3 (F)

ACGIH TLV: 2.5 MG/M3 (F); 8990

BARIUM FLUORIDE

CAS: 7787-32-8

RTECS: CQ9100000

ACGIH TLV: 0.5 MG/CUM

ALUMINUM (SARA III)

CAS: 7429-90-5

RTECS: BD0330000

OSHA PEL 15MG/M3 DUST/5 FUME

ACGIH TLV: 10MG/M3 DUST; 9192

NICKEL (SARA III)

CAS: 7440-02-0

RTECS: QR5950000

OSHA PEL 1 MG/M3

ACGIH TLV: 1 MG/M3; 9192

Effects of Overexposure:DIZZINESS, NAUSEA, OR DRYNESS OR IRRITATION OF
NOSE, THROAT OR EYES, SIDEROSIS.

First Aid:EYE & SKIN: IF IRRITATION OF FLASH BURNS DEVELOP AFTER
EXPOSURE, CONSULT PHYSICIAN.

Flash Point:NON FLAMMABLE
Unusual Fire/Explosion Hazard:WELDING ARC & SPARKS CAN IGNITE
COMBUSTIBLES.

Handling and Storage Precautions:TO DETERMINE THE COMPOSITION &
QUANTITY OF FUMES/GASES TAKE AN AIR SAMPLE INSIDE THE WELDER'S LMET
IF WORN OR IN THE WORKER'S BREATHING ZONE.
Other Precautions:ARC RAYS CAN INJURE EYES & BURN SKIN. ELECTRIC SHOCK
CAN KILL.

Respiratory Protection:AIR SUPPLIED RESPIRATOR WHEN WELDING IN CONFINED
SPACE IF >TLV.
Ventilation:LOCAL EXHAUST AT THE ARC TO KEEP THE FUMES/GASES Protective Gloves:WELDER'S
Eye Protection:FACE SHIELD W/FILTER LENS
Other Protective Equipment:ARM PROTECTORS, APRONS, HATS, SHOULDER
PROTECTION.
Supplemental Safety and Health
MSDS DATE: 8-85. ALSO CONTAINS: IRON (NO4565500), MANGANESE
(OM2100000), TITANIUM OXIDE (XR2275000), SILICON (VW0400000).

Stability Indicator/Materials to Avoid:YES
N/K _
Hazardous Decomposition Products:CO, CO2, OZONE, OXIDES OF
FE/MN/SI/TI/MG/BA/AL/N/NI

Waste Disposal Methods:PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT. DISCARD ANY PRODUCT, RESIDUE, DISPOSABLE CONTAINER OR
LINER IN AN ENVIRONMENTALLY ACCEPTABLE MANNER, IN FULL COMPLIANCE
W/FEDERAL, STATE & LOC AL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.