BBYHK - HYBLAST

  • MSDS: BBYHK
  • Manufacturer: HYSAN CORP
  • Product Name: HYBLAST
  • National Stock Number: 6840-00F007574
Product Identification

Product ID:HYBLAST
MSDS Date:11/01/1985
FSC:6840
NIIN:00F007574
MSDS Number: BBYHK

Responsible Party
HYSAN CORPORATION
919 WEST 38TH STREET
CHICAGO, IL 60609

Emergency Phone: (312) 376-8900

Info Phone: (312) 376-8900

Cage: HYSAN

Contractor
HYSAN CORPORATION
HOUSTON, TX 77019 US

Telephone: 713-620-7740

Cage: HYSAN

Ingredients

MINERAL SPIRITS

CAS: 64742-47-8

Fraction By Weight: >1%


METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE) (SARA III)

CAS: 71-55-6

RTECS: KJ2975000

Fraction By Weight: >1%

OSHA PEL 350 PPM/450 STEL

ACGIH TLV: 350 PPM/450STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


CARBON DIOXIDE

CAS: 124-38-9

RTECS: FF6400000

Fraction By Weight: >1%

OSHA PEL 5000 PPM

ACGIH TLV: 5000PPM/30000STEL;93


RESMETHRIN

CAS: 10453-86-8

RTECS: GZ1310000

Fraction By Weight: <1%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES - MAY CAUSE IRRITATION. SKIN -
PROLONGED CONTACT MAY CAUSE SLIGHT IRRITATION. INGESTION - HARMFUL
IF SWALLOWED. ASPIRATION OF LIQUID MAY CAUSE CHEMICAL PNEUMONITIS.
INHALATION - NARCOSIS. ANESTHE TIC EFFECTS MAY OCCUR IN 500-1000
PPM RANGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN: PROLONGED CONTACT MAY CAUSE SLIGHT
IRRITATION. EYES: MAY CAUSE IRRITATION.

First Aid

First Aid:EYES: FLUSH WITH WATER FOR 15 MIN. SKIN: WASH WITH SOAP AND
WATER. INGESTION: CALL PHYSICIAN. DON'T INDUCE VOMITING UNLESS
DIRECTED BY A PHYSICIAN. INHALATION: REMOVE TO FRESH AIR.

Fire Fighting

Flash Point Method:TCC
Flash Point:150F
Lower Limits:10%
Upper Limits:17%
Extinguishing Media:CO2, FOAM OR DRY CHEMICAL
Fire Fighting Procedures:KEEP CONTAINERS COOL. USE SHIELDING TO PROTECT
PERSONNEL AGAINST BURSTING, RUPTURING OR VENTING CONTAINERS.

Accidental Release

Spill Release Procedures:PROVIDE ADEQUATE VENTILATION. WIPE UP ANY
SPILLS, THEN WASH WITH SOAP & WATER.

Handling

Handling and Storage Precautions:WARNING - CONTENTS UNDER PRESSURE.
DON'T STORE WHERE TEMPS MAY EXCEED 130F. KEEP OUT OF REACH OF
CHILDREN. STORE IN A DRY, COOL AREA.

Exposure Controls

Respiratory Protection:NONE REQUIRED
Ventilation:LOCAL EXHAUST - NONE REQUIRED. PROVIDE MECHANICAL
VENTILATION TO KEEP Protective Gloves:NONE REQUIRED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:NONE REQUIRED
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:165F
Vapor Pres:45
Vapor Density:5.3
Spec Gravity:0.943
Evaporation Rate & Reference:(BU AC = 1): 2.7
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR THIN LIQUID HAVING A MILD ODOR
Percent Volatiles by Volume:>95%
Corrosion Rate:N/

Stability

Stability Indicator/Materials to Avoid:YES
AVOID STRONG OXIDANTS
Stability Condition to Avoid:HEAT
Hazardous Decomposition Products:HCL, COX, & MIN TRACES OF PHOSGENE &
CHLORINE

Disposal

Waste Disposal Methods:DON'T PUNCTURE OR INCINERATE CONTIANERS. REPLACE
CAP AND DISCARD IN TRASH.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.