BCBBL - ACCUSPIN SPIN-ON DOPANT UDG

  • MSDS: BCBBL
  • Manufacturer: ALLIED CHEMICAL CORP
  • Product Name: ACCUSPIN SPIN-ON DOPANT UDG
  • National Stock Number: 6850-00K000556
Product Identification

Product ID:ACCUSPIN SPIN-ON DOPANT UDG
MSDS Date:01/01/1985
FSC:6850
NIIN:00K000556
MSDS Number: BCBBL

Responsible Party
ALLIED CHEMICAL CORP
COLUMBIA RD & PARK AVE
MORRISTOWN, NJ 07960
US

Emergency Phone: NONE

Cage: 1L168

Contractor
ALLIED-SIGNAL INC
1087R MORRISTOWN, NJ 07962-2332 US

Telephone: 201-455-4414

Cage: 1L164

Ingredients

SILICATE ESTER

Fraction By Weight: UNK

ACGIH TLV: 10PPM


ALIPHATIC ALCOHOL

Fraction By Weight: UNK

ACGIH TLV: 400PPM

Hazards

Effects of
Overexposure:EYES:IRRITNT;SKIN:DEFAT/DERMATITUS;INHALE,INGEST:CENTR
AL NERVOUS SYSTEM DEPRESS,COULD BE FATAL.

First Aid

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE OXYGEN IF NEEDED, CALL
PHYSICIAN;SKIN,EYES:FLUSH W.H*2O;INGESTION:INDUCE VOMIT. IF VICTIM
NOT ALERT,GIVE BLACK COFFEE & ACTIVATED CHARCOAL. CALL A DR.

Fire Fighting

Flash Point Method:CC
Flash Point:=12.8C, 55.F
Autoignition Temp:Autoignition Temp Text:750F
Lower Limits:2.0
Upper Limits:12
Extinguishing Media:SM:DRY CHEM.,CO*2;LG:ALCOHOL FOAM.
Fire Fighting Procedures:SELF-CNTND BRTHG APP;USE H*2O TO COOL CONT.&
KNOCK VAPOR DOW
Unusual Fire/Explosion Hazard:COMBUSTION MAY RELEASE CO,CO*2,&
ALDEHYDES. WATER NOT EFFECTIVE FIRE EXTINGUISHING AGENT.

Accidental Release

Spill Release Procedures:STOP LEAK. ELIMINATE IGNITION SOURCES. ABSORB
W SODA ASH OR NON COMBUSTIBLE ABSORBENT, SWEEP UP INTO COVERED
POLYETHYLENE DRUMS. STORE IN WELL VENTILATED AREA. (NOTE
INCOMPATABILITIES,PENDING DISPOSAL ).

Handling

Handling and Storage Precautions:SAME AS FOR FLAMMABLE ALCOHOLS. STORE
IN COOL, WELL VENTILATED, LOW FIRE RISK AREA. PROTECT FROM PHYSICAL
DAMAGE. AVOID CONTACT.
Other Precautions:FOLLOW APPLICABLE OSHA RULES. MFG. RECOMMENDS KEEPING
PRODUCT REFRIGERATED; DO NOT STORE WITH FOODSTUFFS.

Exposure Controls

Respiratory Protection:IF EXPOSED TLV: WEAR SELF-CNTND BRTHG APP OR AIR
LINE RESPIRATOR.
Ventilation:HANDLE ONLY WITHIN CLOSED VENTILATED SYSTEM (EXHAUST HOOD).
Protective Gloves:RUBBER
Eye Protection:SAFETY/CHEM GOGGLES.
Other Protective Equipment:FACE SHIELD WHEN POUR;NO CONTACT
LENS;PROTECTIVE CLOTHING.
Supplemental Safety and Health
ALLIED CHEMICAL PRODUCT CODE NO.186-002997.

Chemical Properties

HCC:F2
Boiling Pt:=80.C, 176.F
Vapor Pres:<20
Vapor Density:2.1
Spec Gravity:0.849
Evaporation Rate & Reference:>8 (ETHER=1)
Solubility in Water:COMPLETE
Appearance and Odor:LIQUID,CLEAR SOLUTION; ACIDIC ODOR.
Percent Volatiles by Volume:95

Stability

Stability Indicator/Materials to Avoid:YES
ACETALDEMYDE. STRONG OXIDANTS,ETHYLENE OXIDE,HOCL, CHLORINE
Stability Condition to Avoid:ADDITIONAL
INCOMPATABILITY:ISOCYANATES,NITROFORM,HCLO*4.
Hazardous Decomposition Products:NO DATA: OXIDATION MAY RELEASE
CO,CO*2, & ALDEHYDES.

Disposal

Waste Disposal Methods:CONTACT SUPPLIER FOR DISPOSAL METHODS. DISPOSE
ONLY IN FULL REGULATORY COMPLIANCE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.