Product ID:85-X-30,ANTI CRATERING ADDITIVE,POLYURETHNE
MSDS Date:01/01/1985
FSC:8010
NIIN:00K001234
MSDS Number: BCCLZ

DEFT CHEMICAL COATING

17451 VON KARMAN AVE
IRVINE, CA 92714-6205
US

Cage: EO418

DEFT, INC.

IRVINE, CA 92614 US

Telephone: 949-474-0400

Cage: 33461

N-BUTYL ACETATE (SARA III)

CAS: 123-86-4

RTECS: AF7350000

Fraction By Weight: 50.0%

OSHA PEL 150 PPM/200 STEL

ACGIH TLV: 150 PPM/200STEL;9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

NON-AQUEOUS SOLUTION,HAZARD UNKNOWN,UNIDENTIFIED

Fraction By Weight: 50.0%

Effects of Overexposure:MAY BE IRRITATING TO SKIN & EYES;NAUSEOUS
AND/OR DIZZY FEELING FROM INHALATION.

First Aid:EYES/SKIN:FLUSH IMMEDIATELY WITH WATER FOR 15 MIN. REMOVE
CONTAMINATED CLOTHING. INHALES: REMOVE TO FRESH AIR. GIVE CPR OR
OXYGEN IF NEEDED. KEEP WARM/QUIET.GET MEDICAL ATTENTION. EFFECTS
SHOULD DISAP PEAR AFTER 10 MIN.

Flash Point:55F(13C)-TOC
Lower Limits:1.6
Extinguishing Media:CO*2, FOAM, DRY CHEM & H*2O FOG.
Fire Fighting Procedures:NO WATER ON MATL. WATER SPRAY TO ABSORB
VAPOR/COOL CONT.
Unusual Fire/Explosion Hazard:CAUTION AGAINST APPLICATION TO HOT
SURFACES & USE IN AREAS WHERE SOURCES OF IGN MAY BE PRESENT.

Spill Release Procedures:ELIMINATE IGNITION SOURCES. STOP LEAK.
EVACUATE AREA.DO NOT TOUCH SPILLAGE. SM SPILL:ABSORB W. INERT
ABSORBENT. PLACE IN CLOSED CONTAINER. FLUSH AREA W. WATER. LG
SPILL: DIKE AHEAD FOR LATER DISPOSAL. NOTIFY AUTHORITIES.

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENT,LOW FIRE
RISK AREA. PROTECT FROM PHYSICAL DAMAGE.AVOID ANY PHYSICAL CONTACT.
KEEP CONTAINERS TIGHTLY CLOSED.
Other Precautions:AVOID PROLONGED INHALATION OF VAPORS;DO NOT USE WATER
STREAM ON FIRES WHICH MIGHT SPREAD THE FIRE.WATER SPRAY OR FOG CAN
BE USED EFFECTIVELY.

Respiratory Protection:NIOSH/MSHA/MESA APPROVD SCBA
Ventilation:MECHANICAL (GENERAL/LOCAL EXHAUST)
Protective Gloves:RUBBER
Eye Protection:GOGGLES/FACE SHIELD
Other Protective Equipment:WEAR FULL PROTECTIVE CLOTHING.
Supplemental Safety and Health
ONE PART PRODUCT USED AS ADDITIVE FOR POLYURETHANE;PER MFR,PROD CLASS
IS FLUOROCHEMICAL ADDITIVE;MSDS FM MFR DATED:6/13/78.

HCC:F3
Boiling Pt:B.P. Text:244-262F
Vapor Density:>1.0
Spec Gravity:0.9946
Evaporation Rate & Reference:<1(SLWR THAN ETHR)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:THIN CLEAR ORGANIC LIQ-ODOR OF BUTYLACETATE.
Percent Volatiles by Volume:57.0

Stability Indicator/Materials to Avoid:YES
OXIDIZERS, CORROSIVES, PEROXIDES
Stability Condition to Avoid:SHOCK,HEAT,IGNITION SOURCES
Hazardous Decomposition Products:MAY PRODUCE TOXIC PROD INCLUDNG
HYDROGEN FLUORIDE AT 600F.

Waste Disposal Methods:MFR STATES THAT WASTE MAY BE BLED INTO SEWER
SYSTEM W/ADEQUATE TREATMENT FACILITIES.USE LG AMT OF WATER;DISPOSER
MUST COMPLY WITH ALL FED,STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.