Product ID:EPOCAST 221-40
MSDS Date:01/01/1985
FSC:8030
NIIN:00K001340
MSDS Number: BCCSQ

Emergency Phone: 213-247-6210

Cage: GO767

Telephone: 818-247-6210/800-873-1138

Cage: GO767

SILICA FILLED EPOXY RESIN; SPI ERF HAZARD CLASS II.

Fraction By Weight: 100%

Effects of Overexposure:PROLONGED/REPEATED SKIN EXPOSURE MAY CAUSE
DERMATITIS IN ALLERGIC INDIVIDUALS.

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH,
GET MEDICAL ATTENTION; EYE CONTACT REQUIRES IMMEDIATE MEDICAL
ATTENTION.

Flash Point:>350F,>176C(COC)
Extinguishing Media:WATER OR ANY COMMERCIAL UNIT
Fire Fighting Procedures:WEAR SELF-CNTND BRTHG APP:H*2O SPRAY TO COOL
CONTR.
Unusual Fire/Explosion Hazard:MATL MAY/MAY NOT BURN. CONTAINER MAY
EXPLODE IN HEAT OF FIRE.FIRE MAY YIELD TOXIC GASES.

Spill Release Procedures:EVACUATE UNPROTECTED PERSONS. ELIM IGNITION
SOURCES. STOP LEAK. H*2O SPRAY COOL CONT/DIVERT SPILL FROM
FIRE/HEAT. PROVIDE VENTILATION. ABSORB W/COMMERCIAL
ABSORBENT,SHOVEL INTO METAL DRUMS:LG SPILL:DI KE W COMMERCIAL
ABSORBENT,PUMP INTO COVERED DRUMS.

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENT,LOW FIRE
RISK AREA. PROTECT FROM PHYSICAL DAMAGE.AVOID ANY PHYSICAL CONTACT.
KEEP CONTAINERS TIGHTLY CLOSED.
Other Precautions:MAINTAIN STRICT HYGIENE, AVOID PHYSICAL CONTACT,
REMOVE & WASH CONTAMINATED CLOTHING. MFG SUGGESTS USE OF PROTECTIVE
SKIN CREAMS. EXHAUST CURING OVENS TO OPEN AIR. AVOID TEMPERATURE
EXTREMES.

Respiratory Protection:IF EXPOSD TLV,NIOSH/MESA APPR SELF-CNTND BRTHG
APP (POS PR MODE)
Ventilation:MECHANICAL (GENERAL/LOCAL EXHAUST)
Protective Gloves:PV/RUBBER
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:FULL WORK CLOTHING TO PREVENT REPEATED OR
PROLONGED CONTACT.
Supplemental Safety and Health
MSDS FROM MFG DATED 1/14/74.

HCC:N1
Boiling Pt:B.P. Text:DECOMPOSES
Spec Gravity:1.53
Solubility in Water:NEGLIGIBLE
Appearance and Odor:TAN PASTE; SLIGHT ETHEREAL ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG AMINES
Stability Condition to Avoid:HEAT, IGNITION SOURCES
Hazardous Decomposition Products:NONE NOTED, BUT EXPECT CO, CO*2, H*2O.

Waste Disposal Methods:KEEP IN COVERED CONTAINERS PENDING DISPIOSAL.
HANDLE AND DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE AND LOCAL REGULATIONS. MFG SUGGESTS
INCINERATION OR BURY IN APPROVED LANDFILL, AFTER REACTING WITH
CATALYST/HARDENER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.