Product ID:EPOCAST 31C
MSDS Date:01/01/1985
FSC:8010
NIIN:00K001342
MSDS Number: BCCSS

Telephone: 818-247-6210/800-873-1138

Cage: GO766

CYCLOALIPHATIC EPOXY RESIN;SPI ERF HAZARD CLASS 6(SUSPECT

Fraction By Weight: 100%

Effects of Overexposure:MAY CAUSE DELAYED AND DERIOUS INJURY;LOCAL
DERMATITIS IN ALLERGIC INDIVIDUALS.

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH,
GET MEDICAL ATTENTION.

Flash Point:>400F,>204C(COC)
Extinguishing Media:STANDARD FIRE EXTINGUISHERS
Fire Fighting Procedures:WEAR SELF-CNTD BRTHG APP H*20 SPRAY TO COOL
CONTR.
Unusual Fire/Explosion Hazard:MATL MAY/MAY NOT BURN. CONTAINER MAY
EXPLODE IN HEAT OF FIRE.FIRE MAY YIELD TOXIC GASES.

Spill Release Procedures:EVACUATE UNPROTECTED PERSONS. ELIM IGNITION
SOURCES. STOP LEAK. H*2O SPRAY COOL CONT/DIVERT SPILL FROM
FIRE/HEAT. PROVIDE VENTILATION. ABSORB W COMMERCIAL
ABSORBENT,SHOVEL INTO METAL DRUMS:LG SPILL:DI KE W COMMERCIAL
ABSORBENT,PUMP INTO COVERED DRUMS.

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENT,LOW FIRE
RISK AREA. PROTECT FROM PHYSICAL DAMAGE.AVOID ANY PHYSICAL CONTACT.
KEEP CONTAINERS TIGHTLY CLOSED.
Other Precautions:MAINTAIN STRICT HYGIENE,AVOID PHYSICAL CONTACT,
REMOVE & WASH CONTAMINATED CLOTHING. MFG SUGGESTS USE OF PROTECTIVE
SKIN CREAMS. EXHAST CURING OVENS TO OPEN AIR. AVOID TEMPERATURE
EXTREMES.

Respiratory Protection:IF EXCED TLV,NIOSH/MSHA APPR SELF-CNTND BRTHG
APP (POS PR MODE)
Ventilation:MECHANICAL (GENERAL/LOCAL EXHAUST)
Protective Gloves:PV/RUBBER
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:FULL WORK CLOTHING TO PREVENT REPEATED OR
PROLONGED CONTACT.
Supplemental Safety and Health
PART A OF TWO PART PRODUCT. THIS PART IS BASE. SEE P/N FOR PART
B,CATALYST.MSDS DATED 6/4/73.KEY1:N1.

HCC:N1
Spec Gravity:>2.3
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK PASTE;ODOR NOT SPECIFIED.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
STRONG AMINES OR ACIDS
Stability Condition to Avoid:HEAT, IGNITION SOURCES
Hazardous Decomposition Products:NONE NOTED, BUT EXPECT CO, CO*2, H*2O
Conditions to Avoid Polymerization:CONTACT WITH STRONG AMINES OR ACIDS
SHOULD BE AVOIDED.

Waste Disposal Methods:KEEP IN COVERED CONTAINERS PENDING DISPOSAL.
HANDLE AND DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE AND LOCAL REGULATIONS. MFG SUGGESTS
BURY IN APPROVED LANDFILL,AFTER R EACT WITH HARDENER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.