Product ID:EPOCAST 7SB(HARDENER)
MSDS Date:01/01/1985
FSC:8030
NIIN:00K001345
MSDS Number: BCCSX

Telephone: 818-247-6210/800-873-1138

Cage: GO766

POLYAMINE;NOT ON TOXIC SUBSTANCES LIST, PER MFTG MSDS.

Fraction By Weight: 100%

Effects of Overexposure:POSSIBLE DERMATITIS IN ALLERGIC PERSONS;FUMES
IRRITATE MUCOUS MEMBRANE(EYES,BRONCHIAL,ETC)

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE
MOUTH,GET MEDICAL ATTENTION.

Flash Point:>320F,>160C(COC)
Extinguishing Media:WATER OR ANY COMMERCIAL UNIT
Fire Fighting Procedures:USE WATER SPRAY TO COOL CONT, KNOCK-DOWN
VAPORS. WEAR SCBA.
Unusual Fire/Explosion Hazard:MATL MAY/MAY NOT BURN. CONTAINER MAY
EXPLODE IN HEAT OF FIRE.FIRE MAY YIELD TOXIC GASES.

Spill Release Procedures:EVACUATE UNPROTECTED PERSONS. ELIM IGNITION
SOURCES. STOP LEAK. H*2O SPRAY COOL CONT/DIVERT SPILL FROM
FIRE/HEAT. PROVIDE VENTILATION. ABSORB W/COMMERCIAL
ABSORBENT,SHOVEL INTO METAL DRUMS:LG SPILL:DI KE W COMMERCIAL
ABSORBENT,PUMP INTO COVERED DRUMS.

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENT,LOW FIRE
RISK AREA. PROTECT FROM PHYSICAL DAMAGE.AVOID ANY PHYSICAL CONTACT.
KEEP CONTAINERS TIGHTLY CLOSED.
Other Precautions:MAINTAIN STRICT HYGIENE,AVOID PHYSICAL CONTACT,
REMOVE & WASH CONTAMINATED CLOTHING. MFG SUGGESTS USE OF PROTECTIVE
SKIN CREAMS. EXHAUST CURING OVENS TO OPEN AIR. AVOID TEMPERATURE
EXTREMES.

Respiratory Protection:IF EXPOSD TLV,NIOSH/MESA APPR SELF-CNTND BRTHG
APP (POS PR MODE)
Ventilation:MECHANICAL (GENERAL/LOCAL EXHAUST)
Protective Gloves:PV/RUBBER
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:FULL WORK CLOTHING TO PREVENT REPEATED OR
PROLONGED CONTACT.
Supplemental Safety and Health
PART B OF TWO PAT PRODUCT.THIS PART IS HARDENER(CATALYST).SEE P/N FOR
BASE.MFG MSDS DATED 4/11/74. PRODUCT IS GENERAL PURPOSE HIGH
STRENGTH EPOXY SURFACE COATING.

HCC:N1
Boiling Pt:B.P. Text:DECOMPOSES
Spec Gravity:1.05
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER PASTE; STRONG AMINE ODOR.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
ACIDS & PEROXIDES
Stability Condition to Avoid:HEAT, IGNITION SOURCES
Hazardous Decomposition Products:EXPECT AMINE FRAGMENTS IN FIRES.

Waste Disposal Methods:KEEP IN COVERED CONTAINERS PENDING DISPOSAL.
HANDLE AND DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE AND LOCAL REGULATIONS. MFG SUGGESTS
INCINERATION OR BURY IN APPROVED LANDFILL,AFTER REACTING WITH
RESIN.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.