Product ID:URETHANE 87647A
MSDS Date:01/01/1985
FSC:8010
NIIN:00K001351
MSDS Number: BCCTJ

FURANE PRODUCTS; M & T CHEMICALS, INC.

Emergency Phone: 213-247-6310

Cage: GO766

CIBA SPECIALTY CHEMICALS CORP, N. A. / PERFORMANCE

LOS ANGELES, CA 90039-1011 US

Telephone: 818-247-6210/800-873-1138

Cage: GO766

DIISOCYANATE URETHANE PREPOLYMER

Fraction By Weight: >99%

TOLUENE-2,4-DIISOCYANATE (TDI) (SARA III)

CAS: 584-84-9

RTECS: CZ6300000

Fraction By Weight: <1%

OSHA PEL C,0.02 PPM/0.02 STEL

ACGIH TLV: 0.005PPM/0.02STEL;93

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

Effects of Overexposure:IRRITANT TO EYES,SKIN,RESPIRATORY TRACT.

First Aid:INHALE:REMOVE TO FRESH AIR,GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES,BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.

Flash Point:>450F>232C (COC)
Extinguishing Media:WATER, OR ANY COMMERCIAL UNIT
Fire Fighting Procedures:WEAR SELF-CNTND BRTHG APP:H*2O SPRAY TO COOL
CONTR.
Unusual Fire/Explosion Hazard:MATL MAY/MAY NOT BURN. CONTAINER MAY
EXPLODE IN HEAT OF FIRE.FIRE MAY YIELD TOXIC GASES.

Spill Release Procedures:EVACUATE UNPROTECTED PERSONS. ELIM IGNITION
SOURCES. STOP LEAK. H*2O SPRAY COOL CONT/DIVERT SPILL FROM
FIRE/HEAT. PROVIDE VENTILATION. ABSORB W/COMMERCIAL
ABSORBENT,SHOVEL INTO METAL DRUMS:LG SPILL:DI KE W COMMERCIAL
ABSORBENT,PUMP INTO COVERED DRUMS.

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENT,LOW FIRE
RISK AREA. PROTECT FROM PHYSICAL DAMAGE.AVOID ANY PHYSICAL CONTACT.
KEEP CONTAINERS TIGHTLY CLOSED.
Other Precautions:MAINTAIN STRICT HYGIENE,AVOID PHYSICAL CONTACT,REMOVE
& WASH CONTAMINATED CLOTHING. MFG SUGGESTS USE OF PROTECTIVE SKIN
CREAMS. EXHAUST CURING OVENS TO OPEN AIR. AVOID TEMPERATURE
EXTREMES.

Respiratory Protection:IF EXPOSD TLV,NIOSH/MESA APPR SELF-CNTND BRTHG
APP (POS PR MODE)
Ventilation:MECHANICAL (GENERAL/LOCAL EXHAUST)
Protective Gloves:PV/RUBBER
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:FULL WORK CLOTHING TO PREVENT REPEATED OR
PROLONGED CONTACT.
Supplemental Safety and Health
PART A OF 2 PART PRODUCT. THIS PART IS POLYMER. SEE P/N B FOR PART
B.(HARDENER). PRODUCT FOAMS IN CONTACT WITH H*20 & IS
INSOLUBLE.KEY1:N1.

HCC:N1
Boiling Pt:B.P. Text:DECOMPOSES
Spec Gravity:1.07
Solubility in Water:NEGLIGIBLE
Appearance and Odor:MISCOUS LIQUID;PUNGENT ODOR

Stability Indicator/Materials to Avoid:YES
MOISTUR,WATER,STRONG ALKALIES,PEROXIDES.
Stability Condition to Avoid:HEAT,IGNITION SOURCES,CONTACT WITH
MOISTURE OR WATER.
Hazardous Decomposition Products:NONE NOTED,BUT EXPECT TOXIC VAPORS
FROM TDI

Waste Disposal Methods:KEEP IN COVERED CONTAINERS PENDING DISPOSAL.
HANDLE AND DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE AND LOCAL REGULATIONS. MFG SUGGESTS
BURY IN APPROVED LANDFILL;WASHRES IDUE W STRONG DETERGENT,AMMONIA
H*2O

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.