Product ID:VITON CURATIVE NO 30
MSDS Date:01/01/1985
FSC:6850
NIIN:00K001462
MSDS Number: BCCXS

Emergency Phone: 800-441-7515/3637

Info Phone: 800-441-7515/9450 OR 302-999-5072

Preparer: X

Cage: 18873

Telephone: 800-441-7515;800-441-9442

Cage: 18873

FLUOROELASTOMER

Fraction By Weight: 50.0%

DIHYDROXY AROMATIC COMPOUND

Fraction By Weight: 50.0%

Effects of Overexposure:MAY IRRITATE EYES,SKIN DUE TO HARMFUL VAP GIVEN
AT >200C(>392F).BEFORE USE READ DUPONT PUB VT-100.1

First Aid:IN CASE OF CONTACT,IMMEDIATELY FLUSH EYES WITH PLENTY OF
WATER FOR AT LEAST 15 MIN.CALL A PHYSICIAN;WASH SKIN WITH SOAP AND
WATER.

Flash Point Method:OC
Flash Point:>400F,>204C
Lower Limits:NONE
Upper Limits:NONE
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:FIRE FIGHTERS SHOULD USE NIOSH APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT WHEN FIGHTING CHEMICAL FIRE. USE WATER
SPRAY TO COOL NEARBY CONTAINERS EXPOSED TO FIRE.
Unusual Fire/Explosion Hazard:PELLETS OF VITON MAY ACCUMULATE STATIC
CHARGE BUILD-UP.EXPLOSV HAZ WHEN COMPDG W/FINEL DIVIDED AL.

Spill Release Procedures:MFR SPECIFIES,NO UNUSUAL HAZARDS.SWEEP UP &
PLACE IN SUITABLE CLOSED CONTAINERS FOR LATER DISPOSAL.

Handling and Storage Precautions:AVOID SKIN CONTACT.WASH THOROUGHLY
AFTER HANDLING.AVOID CONTAMINATING TOBACCO.DO NOT SMOKE WHILE
HANDLING.ABOVE 200C(392F),GIVES TOXIC GASEOUS MATL.
Other Precautions:AVOID POWDERED ALUMINUM OR OTHER FINELY DIVIDED
METALS;PROVIDE GROUNDING OF EQUIP WHEN HANDLING PELLETS.PELLETS MAY
ACCUMULATE A STATIC ELECTRIC CHARGE DURING SHIPPG,UNLOADNG/POURNG
FROM BAG.

Respiratory Protection:HAVE EMERGENCY AIR-SUPPLIED RESPIRATORS
AVAILABLE
Ventilation:LOCAL EXHAUST & MECH(GEN) RECOMMENDED BY MFR.
Protective Gloves:IMPERVIOUS
Eye Protection:SAFETY GLASSES
Other Protective Equipment:PROVIDE GROUNDG OF EQUIP WHEN HANDLING
PELLETS(SEE OTHR PREC
Supplemental Safety and Health
MSDS FM MFR DATED:12/81; SPECIAL VENTILATION:DO NOT BREATHE VAPORS
DURING PROCESSING.USE WITH LOCAL VENTILATION.

HCC:N1
Spec Gravity:1.50
Solubility in Water:NEGLIGIBLE
Appearance and Odor:OPAQUE LIGHT TAN TO GRAY PELLETS.SLIGHT ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS;FINELY DIVIDED METALS SUCH AS POWDERED AL.
Stability Condition to Avoid:AVOID TEMP ABOVE 200C(392F) W/O ADEQUATE
VENTILATION.
Hazardous Decomposition Products:HF & FLUOROCARBON OLEFINS ARE EVOLVED
ABOVE 200C(392F)
Conditions to Avoid Polymerization:SEE VENTILATION SECTION.

Waste Disposal Methods:MFR PREFERRED LANDFILL BUT DISPOSAL METHODS MUST
CONFORM TO LOCAL,STATE & FED REGULATIONS.BURNING NOT
RECOMMENDED.WITH INCINERATION,GASEOUS PRODUCTS SHOULD BE REMOVED BY
ALKALINE SCRUBBING.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.