Product ID:DLX-6000
MSDS Date:01/01/1985
FSC:6810
NIIN:00K001476
MSDS Number: BCCYJ

Emergency Phone: 302-774-2421

Cage: GO769

Telephone: 800-441-7515

Cage: GO769

POLYTETRAFLUOROETHYLENE,CAS# 9002-84-0

CAS: 116-14-3

RTECS: KX4025000

Fraction By Weight: 100%

Effects of Overexposure:PTFE POLYMER,WHEN THERMALLY DECOMPOSED MAY
CAUSE POLYMER FUME FEVER,AND FLU-LIKE SYMPTOMS.

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.

Extinguishing Media:WATER OR CO*2 AS APPROPIATE TO THE IGNITION SOURCE
OF FIRE.
Fire Fighting Procedures:EMPLOY PROTECTION AGAINST HYDROGEN FLUORIDE &
COMBUST FUMES.
Unusual Fire/Explosion Hazard:WILL BURN IN 100% OXYGEN,WHEN IGNITION
SOURCE PRESENT.

Spill Release Procedures:SWEEP UP TO PREVENT SLIPPING HAZARD ON
MICROPOWDER.

Handling and Storage Precautions:AVOID CONTAMINATION & INHALATION OF
DUST.
Other Precautions:AT TEMPS ABOVE 250C,TOXIC GASEOUS MATERIALS CAN
EVOLVE.DO NOT CONTAMINATE TOBACCO OR OTHER SMOKING UTENSILS.

Respiratory Protection:BUREAU OF MINES APPROVED MASK.
Ventilation:MECH(GEN)OR LOCAL EXHAUST THAT PROVIDES ADEQUATE
VENTILATION
Protective Gloves:THICK WORK GLOV
Eye Protection:SAFETY GLASSES
Other Protective Equipment:DUST MASK TO PREVENT INHALATION.GLOVES IF
USING HOT MELT.
Supplemental Safety and Health
MSDS EFFECTIVE DATE:10/1/79.SYNONYM:POLYTETRAFLUOROETHYLENE
MICROPOWDER.

HCC:N1
Spec Gravity:2.28
Evaporation Rate & Reference:NIL
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE POWDER,ODORLESS.
Percent Volatiles by Volume:NIL

Stability Indicator/Materials to Avoid:YES
MOLTEN ALKALI METALS,INTERHALOGEN COMPOUNDS.
Stability Condition to Avoid:TEMPS >250C
Hazardous Decomposition Products:HYDROGEN FLUORIDE,PERFLUOROCARBON
EVOLVED ABOVE 250C.

Waste Disposal Methods:INCINERATE IN APPROVED INCINERATOR OR DISPOSE OF
IN APPROVED CHEMICAL DUMP IN ACCORDANCE WITH LOCAL,STATE & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.