BCDCW - OIL BRONZE POWDER OR FLAKES

Product Identification

Product ID:OIL BRONZE POWDER OR FLAKES
MSDS Date:01/01/1985
FSC:6850
NIIN:00K001553
MSDS Number: BCDCW

Responsible Party
E.I. DUPONT DENEMOURS & CO,INC.

Emergency Phone: 302-774-2421

Cage: EO721

Contractor
E.I. DUPONT DENE NEMOURS/WILMINGTON, DE 19898
1635 WILMINGTON, DE 19898 US

Telephone: 800-441-7515;800-441-9442

Cage: EO721

Ingredients

OIL RED,CAS# 85-86-9

CAS: 85-85-9

RTECS: QK4250000

Fraction By Weight: 35%


C.I. SOLVENT YELLOW 14 (SARA III)

CAS: 842-07-9

RTECS: QL4900000

Fraction By Weight: 65%

Hazards

Effects of Overexposure:MAY CAUSE MILD IRRITATION & CAN CAUSE SKIN
SENSITIZATION.

First Aid

First Aid:SKIN:WASH W.SOAP & H*2O. EYES:FLUSH W. H*2O. INGESTED:DON'T
INDUCE VOMITING. INHALED:REMOVE TO FRESH AIR. GIVE CPR/OXYGEN IF
NEED. KEEP WARM & QUIET. REMOVE CONTAMINATED CLOTHING. NEVER GIVE
ANYTHING BY MOUTH TO UNCONSCIOUS PERSON.

Fire Fighting

Extinguishing Media:CO*2, FOAM, DRY CHEM & H*2O FOG.
Fire Fighting Procedures:WEAR SELF-CNTND BRTHG APP
Unusual Fire/Explosion Hazard:PRODUCT IS NON FLAMMABLE,BUT IF IGNITED
WILL BURN.DUST MAY FORM EXPLOSIVE MIXTURE WITH AIR.

Accidental Release

Spill Release Procedures:SWEEP UP SPILL,TAKING CARE TO MINIMIZE DUST.

Handling

Handling and Storage Precautions:STORE IN COOL,DRY,WELL-VENTED
AREA.PROTECT FROM PHYSICAL DAMAGE.AVOID PROLONGED/REPEATED
CONTACT.WASH THOROUGHLY AFTER HANDLING.
Other Precautions:STORE IN ORIGINAL CONTAINER AT RM TEMP INDOORS.

Exposure Controls

Respiratory Protection:NO SPECIAL REQMNTS UNDER ORDINARY
CONDITIONS/ADEQUATE VENT.
Ventilation:LOCAL EXHAUST THAT PROVIDES ADEQUATE VENTILATION
Protective Gloves:RUBBER
Eye Protection:GOGGLES
Other Protective Equipment:NONE
Supplemental Safety and Health
MSDS EFFECTIVE:5/27/84.SYNONYM:MIXTURE OF METHYL DERIVATIVES OF
AZOBENZENE-4-AZO-2-NAPHTHOL.MELTING PT:205-235F.SP. GR.-FOR
FLAKES,POWDER-0.216.

Chemical Properties

HCC:T6
Spec Gravity:0.599
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BROWNISH RED POWDER OR FLAKES.

Stability

Stability Indicator/Materials to Avoid:YES
NONE KNOWN
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:NONE NOTED,BUT EXPECT CO, CO*2, H*2O.
NITROGEN OXIDES.

Disposal

Waste Disposal Methods:ELIMINATE IGNITION SOURCES. DESTROY BY LIQUID
INCINERATION. INCINERATION WILL BE EASIER BY MIXING WITH A MORE
FLAMMABLE SOLVENT. HANDLE & DISPOSE IN FULL COMPLIANCE WITH ALL
APPLICABLE INTERNATIONAL,F ED,STATE & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.