BCGDR - DYNASOLVE 100

  • MSDS: BCGDR
  • Manufacturer: DYNALOY INC
  • Product Name: DYNASOLVE 100
  • National Stock Number: 6810-00N000733
Product Identification

Product ID:DYNASOLVE 100
MSDS Date:01/01/1987
FSC:6810
NIIN:00N000733
MSDS Number: BCGDR

Responsible Party
DYNALOY,INC

Emergency Phone: (201)887-9270

Cage: EO195

Contractor
DYNALOY,INC
HANOVER, NJ 07936 US

Telephone: 201-887-9270

Cage: EO195

Ingredients

DIMETHYLFORMAMIDE

CAS: 68-12-2

RTECS: LQ2100000

OSHA PEL S, 10 PPM

ACGIH TLV: S, 10 PPM; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Hazards

Effects of Overexposure:IRRIT TO EYES,SKIN & MUC MEMB;NAUSEA,ABDOMINAL
PAIN,POSSIBLE LIVER DAMAGE,POSSIBLE EMBRYOTOXICITY

First Aid

First Aid:INH:REMOVE TO FRESH AIR;IF NOT BREATHING GIVE ARTIF RESP;IF
BREATHING IS DIFFICULT GIVE O*2;CALL MD.EYES:FLUSH W/WATER FOR 15
MIN;CALL MD.SKIN:FLUSH W/WATER FOR 15 MIN;REMOVE CONTAM
CLOTHES/SHOES;CALL MD.INGEST:INDUCE VOMITING;CALL MD.CARCINOGEN:
NO.

Fire Fighting

Flash Point:136F CC
Lower Limits:2.2
Upper Limits:15.7
Extinguishing Media:WATER SPRAY,CO*2,FOAM,DRY CHEMICAL
Fire Fighting Procedures:WEAR CHEM-PROOF SUIT W/HOOD & SCBA.COOL CANS
W/WATER SPRAY
Unusual Fire/Explosion Hazard:AVOID CONTACT WITH HALOGENATED
HYDROCARBON & INORGANIC NITRATES.

Accidental Release

Spill Release Procedures:WEAR PROTECTIVE EQIUPMENT & USE NIOSH/MSHA
APPROVED SCBA IF INDOORS.ELIMINATE SOURCES OF IGNITION.LARGE
QUANTITIES SHOULD BE GATHERED UP USING SAND (OR OTHER NON-FLAMMABLE
ADSORBANT).FLUSH WITH WATER.

Handling

Handling and Storage Precautions:PROHIBIT SMOKING OR OPEN FLAME IN
AREA.KEEP AWAY FROM HEAT,SPARKS AND OPEN FLAME.AVOID BREATHING
VAPORS & CONTACT W/EYES,SKIN,CLOTHES.(SEE OTHER PREC)
Other Precautions:KEEP CONTAINER CLOSED.WASH THOROUGHLY AFTER HANDLING.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED SELF-CONTAINED BREATHING
APPARATUS
Ventilation:LOC EXHST:WELL VENTILATED AREA.MECH:EXHAUST HOOD.
Protective Gloves:BUTYL RUBBER
Eye Protection:CHEMICAL FACE SHIELD
Other Protective Equipment:BUTYL RUBBER APRON
Supplemental Safety and Health
DATE OF PREP: 3/86

Chemical Properties

Boiling Pt:B.P. Text:307F
Vapor Pres:3.7
Vapor Density:2.5
Spec Gravity:0.95
Evaporation Rate & Reference:<1.0 (BU AC = 1)
Solubility in Water:COMPLETE
Appearance and Odor:PINK LIQUID, AMINE ODOR
Percent Volatiles by Volume:100

Stability

Stability Indicator/Materials to Avoid:YES
MAGNESIUM NITRATE,CARBON TETRACHLORIDE,BENZENE HEXACHLORIDE
Stability Condition to Avoid:CNTCT W/INORG NITRATES & HALOGEN HYDRCRBN
W/FE AT ELEV TEMPS
Hazardous Decomposition Products:DIMETHYLCARBAMOYL CHLORIDE

Disposal

Waste Disposal Methods:INCINERATE IF IN ACCORDANCE WITH FEDERAL,STATE &
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.