BCGNW - GANDO TURBO CLEAN 745

Product Identification

Product ID:GANDO TURBO CLEAN 745
MSDS Date:01/01/1985
FSC:6850
NIIN:00N000896
MSDS Number: BCGNW

Responsible Party
G AND O MANUFACTURING (JOHNSON MANUFACTURING CO)

Emergency Phone: (319) 289-5123

Cage: 73540

Contractor
G AND O MANUFACTURING (JOHNSON MANUFACTURING CO)

Cage: 73540

Ingredients

SODIUM HYDROXIDE (SARA III)

CAS: 1310-73-2

RTECS: WB4900000

Fraction By Weight: 90%

OSHA PEL 2 MG/M3

ACGIH TLV: C 2 MG/M3; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

Effects of Overexposure:SKIN & EYES-CAUSES SEVERE BURNS. INHALATION OF
DUST OR MIST MAY DAMAGE RESPIRATORY TRACT.

First Aid

First Aid:INGESTION:GIVE LARGE QUANTITIES OF WATER OR MILK & SEE DR. AT
ONCE. INHALATION:LEAVE FROM CONTAMINATED AREA UNTIL PROPER
VENTILATION IS RESTORED & CALL MD. SKIN:WASH W/LGE QUANTIES
H20.CALL MD.EYE:IMM EDIATELY FLUSH W/WATER 15 MINUTES.CALL MD!

Fire Fighting

Flash Point:NOT FLAMMABLE

Accidental Release

Spill Release Procedures:SOLID MATERIAL CAN BE SHOVELED-FOLLOWED BY
FLUSHING WITH WATER. DILUTE ACID MAY BE USED TO NEUTRALIZE FINAL
TRACES AFTER FLUSHING.

Handling

Handling and Storage Precautions:KEEP CONTAINER SEALED AND STORE IN DRY
AREA TO AVOID THE PICK-UP OF MOISTURE BY THIS PRODUCT.

Exposure Controls

Respiratory Protection:IF NECESSARY, NIOSH/MSHA APPRVD RESPIRATORY
PROTECTION.
Protective Gloves:RUBBER/PLASTIC
Eye Protection:GOGGLES
Other Protective Equipment:EYE WASH FOUNTAINS & RUNNING WATER SAFETY
SHOES OR RBBR BOOT
Supplemental Safety and Health
VAPOR PRESSURE:42 MMHG @ 1000 C.

Chemical Properties

Boiling Pt:B.P. Text:1388C
Spec Gravity:2.130
Solubility in Water:COMPLETE
Appearance and Odor:WHITE ODORLESS SOLID(FLAKES)

Stability

Stability Indicator/Materials to Avoid:YES
ALUMINUM,WOOL,ZINC,LEATHER,STRONG ACIDS.
Stability Condition to Avoid:REACTS VIOLENTLY W/STRONG ACIDS
Hazardous Decomposition Products:NONE

Disposal

Waste Disposal Methods:NEUTRALIZE WITH ACID BEFORE DISCHARGING-THEN MIX
W/WATER WHILE DISCHARGING IN COMPLIANCE W/LOCAL, STATE & FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.