BCGRJ - AEROSOL HILCO LUBE
- MSDS: BCGRJ
- Manufacturer: HILL MANUFACTURING CO INC
- Product Name: AEROSOL HILCO LUBE
- National Stock Number: 9150-00N000940
Product Identification
Product ID:AEROSOL HILCO LUBE
MSDS Date:01/01/1985
FSC:9150
NIIN:00N000940
MSDS Number: BCGRJ
Responsible Party
Emergency Phone: (404) 522-8364
Cage: 66086
Contractor
Telephone: 404-522-8364
Cage: 9U931
Ingredients
METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE) (SARA III)
CAS: 71-55-6
RTECS: KJ2975000
Fraction By Weight: 65%
OSHA PEL 350 PPM/450 STEL
ACGIH TLV: 350 PPM/450STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
PARAFFIN OIL 100A 100F
Fraction By Weight: 31%
Hazards
Effects of Overexposure:EXCESSIVE INHALATION MAY CAUSE HEADACHE,
DIZZINESS OR NAUSEA.
First Aid
First Aid:EYES:FLUSH W/ WATER. SKIN: WASH W/MILD SOAP & APPLY MILD SKIN
CREAM. INH: GET OUT TO FRESH AIR, CALL MD, USE ARTIF RESP IF NEC.
Fire Fighting
Flash Point:265F
Extinguishing Media:WATER SPRAY, CO*2, DRY CHEMICAL
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:FLUSH W/ WATER INTO RETAINING AREA OR
CONTAINER. AVOID EXPOSURE TO HEAT, SPARKS & OPEN FLAME.
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS & OPEN
FLAME. AVOID PROLONGED CONTACT W/ SKIN ADEQ VENTILATION IS
REQUIRED.
Exposure Controls
Ventilation:MFR RECM LOCAL EXHAUST
Protective Gloves:YES
Eye Protection:YES
Other Protective Equipment:EYE BATH & SAFETY SHOWER
Supplemental Safety and Health
VAPOR PRESSURE: 5.4 PS1A AT 70F
Chemical Properties
Boiling Pt:B.P. Text:188F
Vapor Density:3.3
Spec Gravity:1.0
Evaporation Rate & Reference:3.4 (BU AC)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER LIQ, W/ PETROLEUM ODOR.
Percent Volatiles by Volume:90
Stability
Stability Indicator/Materials to Avoid:YES
AVOID STRONG OXIDIZERS
Hazardous Decomposition Products:THERMAL DECOMP MAY YIELD CARBON
MONOXIDE
Disposal
Waste Disposal Methods:MFR RECM INCINERATE UNDER SAFE CONDITIONS.
DISPOSE IAW FED, STATE & LOCAL CODES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.