BCHWY - HD3490 (FORMERLY H2-3490)

  • MSDS: BCHWY
  • Manufacturer: HYSOL DIV THE DEXTER CORP
  • Product Name: HD3490 (FORMERLY H2-3490)
  • National Stock Number: 8040-00N001717
Product Identification

Product ID:HD3490 (FORMERLY H2-3490)
MSDS Date:01/01/1985
FSC:8040
NIIN:00N001717
MSDS Number: BCHWY

Responsible Party
HYSOL DIVISION, THE DEXTER CORPORATION

Emergency Phone: (7L6) 372-6300

Cage: 14347

Contractor
HYSOL DIVISION, THE DEXTER CORPORATION

Cage: 14347

Ingredients

DIETHYLENE TRIAMINE

CAS: 111-40-0

RTECS: IE1225000

Fraction By Weight: 20%

OSHA PEL 1 PPM

ACGIH TLV: S, 1 PPM; 9192

Hazards

Effects of Overexposure:CAUSES SEVERE SKIN AND EYE BURNS

First Aid

First Aid:SKIN: IMMEDIATELY WASH WITH SOAP AND WATER. EYE: IMMEDIATELY
FLUSH W/WATER AT LEAST 15 MINUTES. CALL MD.

Fire Fighting

Flash Point:215F OC
Extinguishing Media:WATER SPRAY, DRY CHEMICAL, "ALCOHOL" FOAM, OR CO*2
Fire Fighting Procedures:COOL EXPOSED CONTNRS W/WATER. FLUSH SPILL AWAY
FROM EXPOSURE

Accidental Release

Spill Release Procedures:SCRAPE UP EXCESS, TRANSFER TO WASTE CONTAINER.
RINSE AREA W/WATER.

Handling

Handling and Storage Precautions:PROTECT FROM PHYSICAL DAMAGE. STORE IN
COOL, DRY, WELL VENTILATED AREA AWAY FROM ANY AREA WHERE FIRE
HAZARD MAY BE ACUTE.
Other Precautions:IS A STRONG SKIN SENSITIZER. AVOID SKIN CONTACT.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATORY PROTECTION IF
NECESSARY.
Ventilation:MECHANICAL-DO NOT RECIRCULATE UNLESS SCRUBBED WITH ACID.
Protective Gloves:RUBBER/PLASTIC
Eye Protection:GOGGLES IF SPLASH LIKELY
Other Protective Equipment:USE OF PROTECTIVE SKIN CREAM IS RECOMMENDED.
Supplemental Safety and Health
PRODUCT MAY BE USED AS HARDENER FOR R8-2038 AND C8-4L43 RESINS (MFR -
HYSOL DIV) TO FORM INSULATING MATERIALS. SEE CROSS REFERENCE INDEX.

Chemical Properties

Boiling Pt:B.P. Text:404F
Vapor Density:3.5
Spec Gravity:1.0
Solubility in Water:COMPLETE
Appearance and Odor:LIGHT AMBER, MED VISCSTY LIQ; STRNG NH*3 LIKE ODOR

Stability

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:THERMAL DECOMP-HYDROGEN CYANIDE,
NITROGEN OXIDES, CO & CO*2

Disposal

Waste Disposal Methods:SOLIDIFY BY MIXING W/ A PORTION OF EPOXY RESIN
COMPOUND BEFORE LANDFILL BURIAL (MFR). MFR ALSO STATES PRODUCT IS
NOT A HAZARDOUS WASTE UNDER THE RESOURCE CONSERVATION AND RECOVERY
ACT. DISPOSE IN ACC ORDANCE WITH LOCAL, STATE AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.