BCJXT - AMBERLITE IRA-938(OH)RESIN

  • MSDS: BCJXT
  • Manufacturer: ROHM AND HAAS COMPANY
  • Product Name: AMBERLITE IRA-938(OH)RESIN
  • National Stock Number: 8030-00N003405
Product Identification

Product ID:AMBERLITE IRA-938(OH)RESIN
MSDS Date:01/01/1985
FSC:8030
NIIN:00N003405
MSDS Number: BCJXT

Responsible Party
ROHM AND HAAS COMPANY

Emergency Phone: 215-592-3000

Cage: 77902

Contractor
ROHM AND HAAS CO
PHILADELPHIA, PA 19106-2399 US

Telephone: 215-592-2521/215-592-3000

Cage: 77902

Ingredients

ANION EXCHANGER(STYRENE/DIVINYLBENZENE ION EXCHANGE


WATER

CAS: 7732-18-5

RTECS: ZC0110000

Hazards

Effects of Overexposure:EYE: IRRITATION

First Aid

First Aid:EYE: IMMED FLUSH W/LARGE AMOUNTS OF WATER FOR AT LEAST 15
MIN. GET IMMED MEDICAL AID.

Fire Fighting

Extinguishing Media:CO*2,DRY CHEM,WATER FOG
Fire Fighting Procedures:NIOSH/MSHA APPRVD,PRESSURE-DEMAND,SCBA OR
EQUIVALENT

Accidental Release

Spill Release Procedures:FLOOR MAY BE SLIPPERY. USE CARE TO AVOID
FALLS. SWEEP UP & TRANSFER TO CONTAINERS FOR RECOVERY OR DISPOSAL.

Handling

Handling and Storage Precautions:AVOID REPEATED FREEZ-THAW CYCLES. MAX
OPERATING TEMP: 140F;60C. CO NOT PACK COLUMN W/DRY ION EXCHANGE
RESINS.
Other Precautions:DRY BEADS EXPAND WHEN WETTED;THIS EXPANSION CAN CAUSE
A GLASS COLUMN TO SHATTER. PROPER DESIGN OF EQUIP TO PREVENT RAPID
BUILDUP OF PRESS IS NEC IF OXIDIZING AGENT(NITRIC ACID) IS
CONTEMPLATED

Exposure Controls

Respiratory Protection:MFR STATES NONE NEEDED FOR NORMAL OPERATIONS.
Ventilation:NORMAL ROOM VENTILATION
Protective Gloves:IMPERVIOUS
Eye Protection:SPLASH GOGGLES.
Other Protective Equipment:EYEWASH FACILITY
Supplemental Safety and Health
% VOLATILE: 67-73. PHYSICAL DATA BASED ON WATER CONTENT. PH(AQUEOUS
SLURRY) 9.5-11

Chemical Properties

Vapor Pres:17
Vapor Density:0.62
Spec Gravity:1.20
Evaporation Rate & Reference:<1 (BUAC=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:TAN BEADS,MILD AMINE ODOR

Stability

Stability Indicator/Materials to Avoid:YES
CONC NITRIC ACID OR OTHER STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:TEMP OVER 428F;220C
Hazardous Decomposition Products:STYRENE MONOMER;DIVINYLBENZENE

Disposal

Waste Disposal Methods:MFR RECOMMENDS DISPOSING AS ORDINARY TRASH.
DISPOSAL METHOD MUST BE IAW FED, STATE & LOCAL CODES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.