BCLWY - AQUAPON FLOOR PATCH,97-181,COMP B
- MSDS: BCLWY
- Manufacturer: PPG INDUSTRIES INC
- Product Name: AQUAPON FLOOR PATCH,97-181,COMP B
- National Stock Number: 8010-00N006075
Product Identification
Product ID:AQUAPON FLOOR PATCH,97-181,COMP B
MSDS Date:01/01/1985
FSC:8010
NIIN:00N006075
MSDS Number: BCLWY
Responsible Party
Emergency Phone: 412-434-3131
Cage: GO796
Contractor
Telephone: 304-843-1300
Cage: GO796
Ingredients
DIETHYLENE TRIAMINE
CAS: 111-40-0
RTECS: IE1225000
Fraction By Weight: <5%
OSHA PEL 1 PPM
ACGIH TLV: S, 1 PPM; 9192
LEAD (SARA III)
CAS: 7439-92-1
RTECS: OF7525000
Fraction By Weight: <.06%
OSHA PEL 0.05 MG/M3;1910.1025
ACGIH TLV: 0.15 MG/M3;DUST 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
Hazards
Effects of Overexposure:EYE/SKIN: IRRIT. VAPORS: ANESTHETIC,IRRIT OF
RESP TRACT,ACUTE NERVOUS SYSTEM DEPRESSION,COMA
First Aid
First Aid:EYE: FLUSH WITH WATER 15 MINUTES,GET MEDICAL TREATMENT. SKIN:
WASH WITH WATER,REMOVE CONTAMINATED CLOTHING,CONSULT PHYSICIAN.
INHALATION: REMOVE FROM EXPOSURE,RESTORE BREATHING,NOTIFY
PHYSICIAN.
Fire Fighting
Flash Point:>200F/93C (PMCC)
Extinguishing Media:CARBON DIOXIDE,DRY CHEMICAL,FOAM
Fire Fighting Procedures:SELF-CONT BREATH APP,WATER FOG TO COOL EXPOSED
CONTAINERS
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
WXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:SECURE SOURCES OF IGNITION. AVOID BREATHING
VAPORS,VENTILATE AREA. REMOVE WITH INERT ABSORBENT AND NON-SPARKING
TOOLS.
Handling
Handling and Storage Precautions:STORE BELOW 120F/48C. GROUND CONTAINER
WHEN POURING,AVOID FREE FALL IN EXCESS OF A FEW INCHES. DO NOT TAKE
INTERNALLY
Other Precautions:DO NOT FLAME CUT,BRAZE OR WELD WITH OUT NIOSH/MSHA
RESPIRATOR PROTECTION OR ADEQUATE VENTILATION.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN
Ventilation:LOCAL/MECHANICAL TO MAINTAIN BELOW TLV
Protective Gloves:REQUIRED
Eye Protection:SPLASH GOGGLES.
Other Protective Equipment:AS REQUIRED TO PREVENT SKIN CONTACT
Supplemental Safety and Health
PART B OF A TWO PART KIT. PART A ID CODE: 97-180
Chemical Properties
Vapor Pres:0.2
Vapor Density:>1
Evaporation Rate & Reference:<1 (ETHER)
Stability
Stability Indicator/Materials to Avoid:YES
ACIDS
Hazardous Decomposition Products:CARBON MONOXIDE
Disposal
Waste Disposal Methods:COMPLY WITH LOCAL,STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.