BCMLY - CONCEPT

  • MSDS: BCMLY
  • Manufacturer: HYSAN CORP
  • Product Name: CONCEPT
  • National Stock Number: 6840-00N006312
Product Identification

Product ID:CONCEPT
MSDS Date:01/01/1985
FSC:6840
NIIN:00N006312
MSDS Number: BCMLY

Responsible Party
HYSAN CORPORATION
919 W 38TH ST
CHICAGO, IL 60609-1419
US

Cage: HYSAN

Contractor
HYSAN CORPORATION
HOUSTON, TX 77019 US

Telephone: 713-620-7740

Cage: HYSAN

Ingredients

ETHYL ALCOHOL (ETHANOL)

CAS: 64-17-5

RTECS: KQ6300000

Fraction By Weight: 53.5%

OSHA PEL 1000 PPM

ACGIH TLV: 1000 PPM; 9192


2-PHENYLPHENOL (SARA III)

CAS: 90-43-7

RTECS: DV5775000

Fraction By Weight: 0.17%


PARATERTIARYAMYLPHENOL

Fraction By Weight: 0.04%

Hazards

Effects of Overexposure:EYE: IRRITATION

First Aid

First Aid:EYE: FLUSH IMMEDIATELY WITH WATER 15 MINUTES,CALL A PHYSICIAN

Fire Fighting

Flash Point:73F/+22C (TCC)
Lower Limits:6.0
Upper Limits:29.0
Extinguishing Media:CO*2,DRY CHEMICAL
Fire Fighting Procedures:SELF-CONTAIN BREATH APP,WATER FOG TO COOL
EXPOSED CONTAINERS
Unusual Fire/Explosion Hazard:AEROSOL CONTAINERS,MAY RUPTURE WHEN
EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:REMOVE SOURCES OF IGNITION OR HEAT,USE
ADEQUATE VENTILATION. MOP UP SPILLS,THEN RINSE WITH WATER.

Handling

Handling and Storage Precautions:DO NOT STORE AT TEMPERATURES ABOVE
120F/48C. AVOID BREATHING SPRAY OR VAPORS.
Other Precautions:READ ENTIRE LABEL BEFORE USING. KEEP OUT OF REACH OF
CHILDREN.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN
Ventilation:LOCAL/GENERAL
Eye Protection:SAFETY GLASSES
Supplemental Safety and Health
CONTAINER SIZE: 24 OZ CAN

Chemical Properties

Boiling Pt:B.P. Text:180F/82C
Vapor Pres:40
Vapor Density:1.3
Spec Gravity:0.87
Evaporation Rate & Reference:>1 (BUT ACET)
Solubility in Water:SLIGHT
Appearance and Odor:CLEAR THINJ LIQUID,PLEASANTLY PERFUMED.
Percent Volatiles by Volume:99

Stability

Stability Indicator/Materials to Avoid:NO
POLISHED WOOD,FURNITURE,RAYON FABRICS
Stability Condition to Avoid:HEAT
Hazardous Decomposition Products:CO,CO*2

Disposal

Waste Disposal Methods:COMPLY WITH LOCAL,STATE AND FEDERAL REGULATIONS.
DO NOT INCINERATE OR PUNCTURE CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.