BCMND - ZYNOLYTE SUPER CHROME 464

  • MSDS: BCMND
  • Manufacturer: MAJOR PAINT COMPANY
  • Product Name: ZYNOLYTE SUPER CHROME 464
  • National Stock Number: 8010-00N006337
Product Identification

Product ID:ZYNOLYTE SUPER CHROME 464
MSDS Date:01/01/1985
FSC:8010
NIIN:00N006337
MSDS Number: BCMND

Responsible Party
MAJOR PAINT COMPANY

Emergency Phone: (213) 542-7701

Cage: MAJOR

Contractor
MAJOR PAINT COMPANY
2868 TORRANCE, CA 90509-2868 US

Telephone: 310-542-7701

Cage: MAJOR

Ingredients

AROMATIC HYDROCARBON SOLVENT

Fraction By Weight: 5-9%

ACGIH TLV: 200 PPM (MFR)


METHYLENE CHLORIDE (SARA III)

CAS: 75-09-2

RTECS: PA8050000

OSHA PEL 500 PPM/C,1000; Z2

ACGIH TLV: 50 PPM, A2; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


ISOBUTANE-PROPANE PROPELLANT

Fraction By Weight: 30%


ALIPHATIC HYDROCARBON SOLVENT

ACGIH TLV: 500 PPM (MFR)

Hazards

Effects of Overexposure:ANESTHETIC.

First Aid

First Aid:INHAL: REMOVE FROM AREA. CALL A DOCTOR. IF SPRAY GETS IN
EYES, FLUSH W/LG QTYS OF CLEAR WATER. TAKE TO A PHYSICIAN.

Fire Fighting

Flash Point:<20F
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL
Fire Fighting Procedures:KEEP COOL W/WATER SPRAY. REMOVE FROM FIRE AREA
IF POSSIBLE.
Unusual Fire/Explosion Hazard:PRESSURIZED PRODUCT. EXPOSURE TO HEAT MAY
CAUSE BURSTING. STORE BELOW 120F. DO NOT PUNCTURE/INCIN.

Accidental Release

Spill Release Procedures:N/A (MFR)

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. DO NOT
PUNCTURE OR INCINERATE. DO NOT STORE NEAR HEAT, SPARKS OR OPEN
FLAME. NO SMOKING IN AREA OF USE.

Exposure Controls

Ventilation:USE IN A WELL VENTILATED AREA
Supplemental Safety and Health
MFR ADDRESS: 4300 W. 190TH ST. TORRANCE, CA 90509. DATE OF PREP:
3/22/84

Chemical Properties

Vapor Density:>1.0
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:PRESSURIZED SPRAY PAINT
Percent Volatiles by Volume:90

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:STORAGE ABOVE 120F
Hazardous Decomposition Products:THERMAL DECOMP PRODUCTS MAY INCLUDE
HCL & PHOSGENE

Disposal

Waste Disposal Methods:FULL OR EMPTY CONTAINERS SHOULD NOT BE PUNCTURED
OR INCINERATED. DISPOSAL MUST BE IAW FED, STATE & LOCAL CODES

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.