BCMXB - DYNALOY 335,ADHESIVE KIT,PT A & B COMBINED

  • MSDS: BCMXB
  • Manufacturer: DYNALOY INC
  • Product Name: DYNALOY 335,ADHESIVE KIT,PT A & B COMBINED
  • National Stock Number: 8040-00N006491
Product Identification

Product ID:DYNALOY 335,ADHESIVE KIT,PT A & B COMBINED
MSDS Date:01/01/1985
FSC:8040
NIIN:00N006491
MSDS Number: BCMXB

Responsible Party
DYNALOY INC

Emergency Phone: 201-887-9270

Cage: 27905

Contractor
DYNALOY, INC.
INDIANAPOLIS, IN 46203 US

Telephone: 317-788-9925;703-527-3887

Cage: 27908

Ingredients

EPOXY RESIN (PART A) (EPICHLOROHYDRIN (ECH) CONTENT IS 10

Fraction By Weight: 25%


POLYETHLENE POLYAMINE (DIETHYLENE TRIAMINE) & POLYETHYLENE

Fraction By Weight: 100%

ACGIH TLV: SEE SUP DATA


SILVER (SARA III)

CAS: 7440-22-4

RTECS: VW3500000

Fraction By Weight: 75%

OSHA PEL 0.01 MG/M3

ACGIH TLV: 0.1 MG/M3; 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Hazards

Effects of Overexposure:LIQUID CAUSES EYE INJURY AND SKIN BURNS.

First Aid

First Aid:EYE: FLUSH WITH WATER 15 MINUTES,GET MEDICAL ATTN. SKIN: WASH
WITH SOAP & WATER.

Fire Fighting

Flash Point:200F/93C (SETAF)
Extinguishing Media:WATER SPRAY,DRY CHEMICAL,FOAM. TREAT AS CLASS B
FIRE
Fire Fighting Procedures:SELF-CONTAIN BREATH APP

Accidental Release

Spill Release Procedures:VENTILATE AREA,ABSORB WITH SAND OR
VERMICULITE. WASH WITH SOAP & WATER

Handling

Handling and Storage Precautions:GOOD HOUSEKEEPING PROCEDURES,
REASONABLE CARE AND CLEANLINESS.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN.
Ventilation:LOCAL EXHAUST
Protective Gloves:PLASTIC/IMPERVI
Eye Protection:CHEM SPLASH GOGGLES
Other Protective Equipment:APRON & RUBBER FOOT COVERING, EYE WASH &
SHOWER.
Supplemental Safety and Health
TLV FOR DIETHYLENE TRIAMINE IS: S,1 PPM.

Chemical Properties

Vapor Density:1
Evaporation Rate & Reference:<1 (ETHER)
Appearance and Odor:PT A: SILVER PASTE. PT B: AMBER LIQUID.

Stability

Stability Indicator/Materials to Avoid:YES
PREMATURE REACTION WITH ACID & ACIDIC CURING AGENTS
Stability Condition to Avoid:STRONG ACIDS & LARGE QUANTITIES OF EPOXY
RESIN.
Hazardous Decomposition Products:CO,CO*2,OXIDES OF NITROGEN

Disposal

Waste Disposal Methods:COMPLY WITH LOCAL, STATE AND FEDERAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.