BCMXY - C-A571,PART B

Product Identification

Product ID:C-A571,PART B
MSDS Date:01/01/1985
FSC:8010
NIIN:00N006509
MSDS Number: BCMXY

Responsible Party
HYSOL DIVISION,THE DEXTER CORPORATION.

Emergency Phone: 716-372-6300

Cage: DO953

Contractor
HYSOL DIVISION,THE DEXTER CORP.
OLEAN, NY 14760-1297 US

Telephone: 716-372-6300/6309

Cage: DO953

Ingredients

SHORT-CHAIN ALIPHATIC POLYAMINE


LONG-CHAIN ALIPHATIC POLYAMINE

Hazards

Effects of Overexposure:EYE IRRITATION,OR OTHER ALLERGENIC RESPONSES
SUCH AS DERMATITIS.

First Aid

First Aid:IMMEDIATELY AFTER CONTACT,FLUSH EYES OR SKIN W/H*2O. FLUSH
EYES FOR AT LEAST 15 MINUTES,CALL A PHYSICIAN.

Fire Fighting

Flash Point:310F (COC)
Extinguishing Media:ALCOHOL FOAM,DRY CHEMICAL,CO*2
Fire Fighting Procedures:H*2O MAY BE INEFFECTIVE
Unusual Fire/Explosion Hazard:AVOID HEAT,OPEN FLAME,SPARKS

Accidental Release

Spill Release Procedures:FLUSH AREA W/LARGE AMOUNTS OF H*2O. FOR SMALL
SPILLS,SOAK UP ON ABSORBENT MATERIAL.

Handling

Handling and Storage Precautions:STORE IN TIGHTLY CLOSED CONTAINERS IN
COOL AREA.
Other Precautions:AVOID EYE & SKIN CONTACT.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED AIR MASK IN CONFINED AREAS.
Ventilation:LOCAL EXHAUST PREFERABLE,GENERAL MECHANICAL ACCEPTABLE
Protective Gloves:RUBBER/PLASTIC
Eye Protection:SAFETY GLASSES
Other Protective Equipment:SAFETY SHOWER,EYE BATH,PROTECTIVE APRON
Supplemental Safety and Health
VAPOR PRESSURE: <0.01 MMHG.

Chemical Properties

Boiling Pt:B.P. Text:565F
Spec Gravity:0.96
Evaporation Rate & Reference:>1 (BU AC)
Solubility in Water:10%
Appearance and Odor:LOW VISCOSITY AMBER LIQUID,AMMONIA ODOR
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS,OXIDIZERS
Hazardous Decomposition Products:CO,CO*2,NITROGEN OXIDES
Conditions to Avoid Polymerization:EPOXY RESINS,STRONG ACIDS

Disposal

Waste Disposal Methods:INCINERATE IN FURNACE OR BURY IN APPROVED
LANDFILL. WASTE DISPOSAL MUST BE IAW FEDERAL,STATE & LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.