BCMZW - V-100 RESIN (A-022)
- MSDS: BCMZW
- Manufacturer: UNISORB MACHINERY INSTALLATION SYSTEMS
- Product Name: V-100 RESIN (A-022)
- National Stock Number: 8030-00N006548
Product Identification
Product ID:V-100 RESIN (A-022)
MSDS Date:01/01/1985
FSC:8030
NIIN:00N006548
MSDS Number: BCMZW
Responsible Party
Emergency Phone: 517-764-6060
Cage: 64128
Contractor
Telephone: 517-764-6060
Cage: 64128
Ingredients
LIQUID EPOXY RESIN
Fraction By Weight: 25%
PHENOLIC DILUENT
Fraction By Weight: 5%
N-BUTYL GLYCIDYL ETHER (BGE)
CAS: 2426-08-6
RTECS: TX4200000
Fraction By Weight: <5%
OSHA PEL 50 PPM
ACGIH TLV: 25 PPM; 9293
EPICHLOROHYDRIN (SARA III)
CAS: 106-89-8
RTECS: TX4900000
Fraction By Weight: <.5%
OSHA PEL S, 5 PPM
ACGIH TLV: S, 2 PPM; 9293
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
INERT MINERALS
Hazards
Effects of Overexposure:EYES/SKIN: MILD IRRIT. INH: DIZZINESS. POSS
SKIN SENSITIZER.EACH REPORTED TO CAUSE CANCER:LAB ANIMAL
First Aid
First Aid:EYES: FLUSH W/WATER AT LEAST 15 MIN. OBTAIN MEDICAL ATTN.
SKIN: WASH W/SOAP & WATER. REMOVE & WASH CONTAMINATED CLOTHING.
EXCESSIVE INHALATION: REMOVE PERSON TO FRESH AIR. OBTAIN MEDICAL
ATTN.
Fire Fighting
Flash Point:150F
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL
Fire Fighting Procedures:FULL PROTECTIVE EQUIP & SCBA FOR MAJOR FIRES
Unusual Fire/Explosion Hazard:NONE. COMBUSTIBLE LIQUID CLASS III-B
Accidental Release
Spill Release Procedures:SPREAD ABSORBENT MATERIAL OVER AREA. WIPE UP
OR SCRAPE UP MATERIAL. WASH AREA W/SOAP & WATER.
Handling
Handling and Storage Precautions:NONE
Other Precautions:NONE
Exposure Controls
Respiratory Protection:NOT REQD IN MOST INDUST ENVIRON. CONSULT SAFETY
OFF FOR APPROP REQ.
Ventilation:LOCAL EXHAUST: GOOD GNENERAL VENTILATION IS USUALLY
ADEQUATE
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES
Other Protective Equipment:CLEAN, BODY COVERING CLOTHING.
Supplemental Safety and Health
Chemical Properties
HCC:V4
Vapor Density:UNK
Spec Gravity:1.7728
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NOT SOLUBLE
Appearance and Odor:DARK YELLOW ORANGE - MILD ODOR
Percent Volatiles by Volume:0-1
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:CONTACT W/AMINE COMPOUNDS UNDER
UNCONTROLLED CONDITIONS.
Hazardous Decomposition Products:TOXIC FUMES MAY DEVELOP UPON
INCINERATION.
Conditions to Avoid Polymerization:CONTACT W/AMINE COMPOUNDS UNDER
UNCONTROLLED CONDITIONS.
Disposal
Waste Disposal Methods:BURY IN AN APPROVED LANDFILL IN ACCORDANCE
W/FEDERAL,STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.