Product ID:C & C RUST RESIST HEAVY-DUTY CTG,ALL COLORS
MSDS Date:01/01/1987
FSC:8010
NIIN:00N008088
MSDS Number: BCPJW

ILLINOIS BRONZE PAINT COMPANY

300 EAST MAIN STREET
LAKE ZURICH, IL 60047-2580
US

Emergency Phone: 800-228-5635

Info Phone: 312-488-8001

Cage: 91794

ILLINOIS BRONZE PAINT COMPANY

LAKE ZURICH, IL 60047-2580 US

Telephone: 800-228-5635

Cage: 91794

METHYLENE CHLORIDE (SARA III)

CAS: 75-09-2

RTECS: PA8050000

OSHA PEL 500 PPM/C,1000; Z2

ACGIH TLV: 50 PPM, A2; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: 0-10%

OSHA PEL 100 PPM

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 0-28%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

VM&P NAPHTHA (LIGROINE)

CAS: 8032-32-4

RTECS: OI6180000

Fraction By Weight: 0-12%

OSHA PEL 300 PPM/400 STEL

ACGIH TLV: 300 PPM; 9192

ISOBUTANE-PROPANE (50-50 MIX) (%=30-34%) (SEE SUPP DATA FOR

Effects of Overexposure:INHAL:ANESTH.RESP TRACT IRRIT/ACUTE NERVOUS SYS
DEPRESS-SYMP INCLUDE HDACH,DIZZY, (SEE SUPP DATA)

First Aid:EYES:FLUSH IMMED W/LARGE AMTS OF H*2O FOR @ LEAST 15 MIN.GET
MED ATTN.INHAL:REMOVE FROM EXP.GET FRESH AIR.SKIN:WIPE OFF
W/TOWEL.REMOVE REMAINDER W/MINERAL SPIRITS,TURPENTINE/LACQUER
THINNER,IF A LACQU ER (MFR).WASH W/SOAP,H*2O.REMOVE CONTAMCLOTHING.

Flash Point:-40F (-40C)
Extinguishing Media:NFPA CLASS B EXTINGUISHER-CO*2,DRY CHEMICAL/FOAM.
Fire Fighting Procedures:WEAR PRESS DEMAND SCBA,FULL PROT CLTHG.USE
H*20(SEE SUPP DAT
Unusual Fire/Explosion Hazard:CANS RUPTURE FROM INTERNAL PRESS @ 190F &
DISCHARGE FLAM CONTENT.THERMAL DECOMP PROD-HCL & PHOSGENE.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION(FLAMES,HOT SURF
& ELECTRICAL,STATIC/FRICTIONAL SPARKS).AVOID BREATHING
VAPOR.VENTILATE AREA.REMOVE W/INERT ABSORBENT.

Handling and Storage Precautions:DONT STORE ABOVE 120F.DONT SPRAY IN
EYES.DONT PUNCTURE/INCINERATE CANS.DONT TAKE INTERNALLY.DONT FLM
CUT,BRAZE/WELD W/OUT APPROVED RESPIRATOR/VENT.
Other Precautions:NO SMOKING IN AREA OF USE.DONT USE IN GENL VICINITY
OF ARC WELDING,OPEN FLMS/HOT SURFACES.HEAT &/OR UV RADIATION MAY
CAUSE HCL &/OR PHOSGENE FORMATION. DATE OF PREP;SEPT,1979

Respiratory Protection:NIOSH/MSHA APPRVD RESPIRATOR IF FLM
CUT,BRAZE/WELD.
Ventilation:GENL DILUTION/LOCAL EXHAUST VENT TO KEEP < TLV.
Protective Gloves:NONE (MFR)
Eye Protection:CHEM GOGGLES/SFTY GLASSES
Supplemental Safety and Health
OTHR INGRED:BALANCE OF PROD IS INERT RESINS & INERT PIGMENTS. OVEREXP
EFTS:STAGGERING,CONFUSN,UNCONSCIOUS/COMA.SKIN/EYE:IRRIT. SPECIAL
FIRE PROC:TO COOL CLSD CNTNRS,PVNT PRESS BUILD-UP/EXPLO.

Boiling Pt:B.P. Text:42-391F
Vapor Density:> 1
Evaporation Rate & Reference:PRPLNT < ETHER
Percent Volatiles by Volume:89

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:HCL,PHOSGENE,CO

Waste Disposal Methods:DISPOSE OF IAW LOCAL,STATE & FEDERAL
REGULATIONS.INCINERATE IN APPROVED FACILITY.DO NOT INCINERATE
CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.