BCTVL - A9-4297 EPOXY RESIN

  • MSDS: BCTVL
  • Manufacturer: HYSOL DIV THE DEXTER CORP
  • Product Name: A9-4297 EPOXY RESIN
  • National Stock Number: 8010-00N010519
Product Identification

Product ID:A9-4297 EPOXY RESIN
MSDS Date:11/12/1985
FSC:8010
NIIN:00N010519
MSDS Number: BCTVL

Responsible Party
HYSOL DIVISION,THE DEXTER CORPORATION
211 FRANKLIN STREET
OLEAN, NY 14760

Emergency Phone: 716-372-6300

Info Phone: 716-372-6300

Preparer: JAMES P. HORNBURG

Cage: DO953

Contractor
HYSOL DIVISION,THE DEXTER CORP.
OLEAN, NY 14760-1297 US

Telephone: 716-372-6300/6309

Cage: DO953

Ingredients

TALC.ACGIH TLV IS FOR RESPIRABLE DUST

CAS: 14807-96-6

RTECS: VV7720000

Fraction By Weight: 45%

OSHA PEL 20 MPPCF TWA

ACGIH TLV: 2 MG/CUM TWA (1988)

Hazards

LD50 LC50 Mixture:N/K
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SEE SIGNS & SYMPTOMS OF OVEREXPOSURE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:SKIN:MILD
IRRITATION.INGESTION,INHALATION,EYES:N/K
Medical Cond Aggravated by Exposure:N/K

First Aid

First Aid:SKIN:WASH WITH SOAP AND WATER AT FIRST
OPPORTUNITY.INGESTION:CALL MD IMMEDIATELY .INHALATION:REMOVE TO
FRESH AIR.SUPPORT BREATHING (GIVE O*2/ARTIFICIAL RESPIRATION)
.EYES:FLUSH W/PLENTY OF H*2O FOR AT LEAST 15 MIN

Fire Fighting

Flash Point Method:COC
Flash Point:470F,243C
Extinguishing Media:CARBON DIOXIDE,FOAM OR DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:HAZARDOUS DECOMPOSITION PRODUCTS:CARBON
MONOXIDE,ALDEHYDES.

Accidental Release

Spill Release Procedures:SCRAPE UP,TRANSFER TO METAL CONTAINERS.SOLVENT
MAY BE NECESSARY TO CLEAN UP STICKY RESIDUE,BUT OBSERVE FIRE HAZARD
OF SOLVENT.
Neutralizing Agent:N/K

Handling

Handling and Storage Precautions:STORE AWAY FROM DIRECT HEAT,WHICH
MIGHT CAUSE PHYSICAL SEPARATION OF THE FILLER.
Other Precautions:N/K

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATORY APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
CONCENTRATION BELOW TLV .
Protective Gloves:RUBBER OR PLASTIC.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:N/K .
Work Hygienic Practices:N/K
Supplemental Safety and Health
NOTE:FILLER PARTICLES ARE THOROUGHLY WETTED BY EXPOXY RESIN SO AIRBORNE
EXPOSURE DOES NOT OCCUR UNLESS CURED MATL IS SUBSEQUENTLY
GROUND,MACHINED OR SANDED.

Chemical Properties

Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:NIL
Spec Gravity:1.5 (WATER=1)
Evaporation Rate & Reference:>1 (BUTYL ACETATE)
Solubility in Water:INSOLUBLE
Appearance and Odor:WHITE,HIGH VISCOSITY LIQUID,VERY SLIGHT ODOR.
Percent Volatiles by Volume:0

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:N/K
Hazardous Decomposition Products:CARBON MONOXIDE,ALDEHYDES.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Disposal

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .SOLIDIFY BY MIXING WITH A
PORTION OF HARDENER AND THEN BURY IN APPROVED LANDFILL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.