BCVPJ - DAMPING FLUID,SILICONE BASE (5 CST & ABOVE)

  • MSDS: BCVPJ
  • Manufacturer: BOLT INC
  • Product Name: DAMPING FLUID,SILICONE BASE (5 CST & ABOVE)
  • National Stock Number: 9150-00-024-9621
Product Identification

Product ID:DAMPING FLUID,SILICONE BASE (5 CST & ABOVE)
MSDS Date:01/01/1987
FSC:9150
NIIN:00-024-9621
MSDS Number: BCVPJ

Responsible Party
BOLT,INC.
SCARBOROUGH, ME 04074
US

Emergency Phone: 207-883-5541

Info Phone: 207-883-5541

Cage: JO837

Contractor
BOLT,INC.
1208 SCARBOROUGH, ME 04074 US

Telephone: 207-883-5541

Cage: JO837

Ingredients

POLYDIMETHYLSILOXANE (SILICONE FLUID)

CAS: 63148-62-9

Hazards

LD50 LC50 Mixture:ORAL-RAT: 5G/KG
Routes of Entry: Inhalation:UNKNOWN Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:ACUTE:IRRITATION OF EYES,SKIN
POSSIBLE;NO SERIOUS HEALTH EFFECTS. CHRONIC:NO DATA AVAILABLE.
Effects of Overexposure:SEE HEALTH HAZARDS DATA.
Medical Cond Aggravated by Exposure:NO DATA AVAILABLE.

First Aid

First Aid:EYES AND SKIN:FLUSH WITH PLENTY OF WATER FOR 15 MINUTES.CALL
A PHYSICIAN IF NEEDED. INHALATION:REMOVE TO FRESH AIR;CONSULT A
PHYSICIAN IF NEEDED.

Fire Fighting

Flash Point Method:OC
Flash Point:>275F/135C
Extinguishing Media:DRY CHEMICAL,WATER SPRAY,FOAM,CO2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA IN AN ENCLOSED
AREA.
Unusual Fire/Explosion Hazard:N/K (TOXIC GASES OR VAPORS MAY BE
PRESENT)

Accidental Release

Spill Release Procedures:USE PROPER PERSONAL PROTECTION;WIPE
MATERIAL,RESIDUE IS SLIPPERY.APPLY SAWDUST OR SWEEPING COMPOUND TO
AREA OF SPILL TO MINIMIZE SLIP.

Handling

Handling and Storage Precautions:STORE IN COOL,DRY AREA.KEEP AWAY FROM
HEAT,OPEN FLAME AND SPARKS.

Exposure Controls

Respiratory Protection:NONE NORMALLY NEEDED IN CASE OF AN ADEQUATE
VENTILATION.
Ventilation:GENERAL/LOCAL RECOMMENDED
Protective Gloves:SAFETY GLASSES/GOGGLES
Eye Protection:RUBBER/PLASTIC
Other Protective Equipment:APRON,EYE-WASH FOUNTAIN
Work Hygienic Practices:AVOID CONTACT WITH EYES AND SKIN;WASH
THOROUGHLY AFTER EACH USE.
Supplemental Safety and Health

Chemical Properties

HCC:V6
Boiling Pt:B.P. Text:>572F/300C
Melt/Freeze Pt:M.P/F.P Text:<-40F/-40C
Vapor Density:>1.0
Spec Gravity:0.90-0.97
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR,COLORLESS AND ODORLESS LIQUID.

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:EXTREME HEAT
Hazardous Decomposition Products:CO,CO*2 & OXIDES OF SILICON

Disposal

Waste Disposal Methods:DISPOSE OF COLLECTED MATERIAL IN ACCORDANCE WITH
LOCAL,STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.