Product ID:KRYLON1501
MSDS Date:01/01/1985
FSC:8010
NIIN:00-079-3762
MSDS Number: BCXRJ

BORDEN INC., KRYLON DEPARTMENT

Emergency Phone: 215-2782400

Cage: EO688

BORDEN INC., KRYLON DEPT

NORRISTOWN, PA 19404 US

Telephone: (215) 278-2456

Cage: EO688

ACETONE (SARA III)

CAS: 67-64-1

RTECS: AL3150000

Fraction By Weight: 25%

OSHA PEL 1000PPM

ACGIH TLV: 750PPM/1000STEL;9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

PROPANE

CAS: 74-98-6

RTECS: TX2275000

Fraction By Weight: 15%

OSHA PEL 1000 PPM

ACGIH TLV: ASPHYXIANT; 9192

METHYL ISOBUTYL KETONE (HEXONE) (SARA III)

CAS: 108-10-1

RTECS: SA9275000

Fraction By Weight: 10%

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM/75 STEL; 9394

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 10%

OSHA PEL 200 PPM

ACGIH TLV: 200 PPM/300STEL;9394

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 5 - 10%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Effects of Overexposure:DIZZINESS,CONFUSION, WEAKNESS

First Aid:INHALATION:REMOVE TO FRESH AIR. EYES:15 MINUTE WATER FLUSH

Flash Point:NONE
Lower Limits:2
Extinguishing Media:CLASS B DRY CHEMICAL EXTINGUISHER
Fire Fighting Procedures:TREAT AS SOLVENT FIRE
Unusual Fire/Explosion Hazard:SPRAY WILL IGNITE IN OPEN FLAME.DIRECT
FLAME WILL EXPLODE CONTAINER.

Spill Release Procedures:REMOVE SOURCES OF IGNITION.SOAK UP WITH
ABSORBENT MATERIAL.VENTILATE AREA.

Handling and Storage Precautions:AVOID STORAGE AT TEMPERATURES OVER
120F,HEAT SOURCES.
Other Precautions:DO NOT INCENERATE CONTAINERS.DO NOT PUNCTURE
CONTAINERS.DO NOT INHALE BURNING FUMES.

Respiratory Protection:ADEQUATE VENTILATION.
Ventilation:VENTILATE TO KEEP BELOW TLV OF INGREDIENTS.
Protective Gloves:NOT REQUIRED
Eye Protection:NOT MANDATORY
Supplemental Safety and Health
SECTIONII-CELLOSOLVE ACETATE-FJ4375000-3%,TLV
100PPM-BUTANOL-E01400000-2%,TLV-50PPM.METHYLENE
CHLORIDE-PL5775000-5%,TLV-200 PPM

HCC:V3
Vapor Density:>1
Spec Gravity:<1
Evaporation Rate & Reference:>BUTYL ACETATE
Solubility in Water:SLIGHT
Percent Volatiles by Volume:85

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HIGH TEMPERATURES,DIRECT
SUNLIGHT,PUNCTURING
Hazardous Decomposition Products:COMBUSTION PRODUCE TOXIC AND
IRRITATING COMPOUNDS

Waste Disposal Methods:DISCARD WHEN DRY AS NON HAZARDS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.