Product ID:URALANE 8089-A
MSDS Date:01/01/1985
FSC:8040
NIIN:00-083-6494
MSDS Number: BCYDD

FURANE PRODUCTS, M & T CHEMICALS, INC.

Emergency Phone: 213-247-6210

Cage: GO767

FURANE PRODUCTS, M & T CHEMICALS, INC.

LOS ANGELES, CA 90039-1011 US

Telephone: 818-247-6210/800-873-1138

Cage: GO767

POLYISOCYANATE;DIISOCYANATE TERMINATED POLYMER

Fraction By Weight: >99%

TOLUENE-2,4-DIISOCYANATE (TDI) (SARA III)

CAS: 584-84-9

RTECS: CZ6300000

Fraction By Weight: <1%

OSHA PEL C,0.02 PPM/0.02 STEL

ACGIH TLV: 0.005PPM/0.02STEL;93

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

Effects of Overexposure:EYE:IRRITNT;INHALE:POSSIBLE ASTHMATIC SPASM IN
ALLERGIC PERSONS;SKIN:REACTS WITH & ADHERES.

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION.FOR EYE,INHALE,INGEST OR SYMPTOMS OF
OVEREXPOSURE;NOTE:SCREEN WORKE RS FOR PREVIOUS ASTHMA/BREATHING
DISORDERS.

Flash Point:>220F,>104C(COC)
Extinguishing Media:WATER,FOAM, OR DRY CHEMICAL POWDER.
Fire Fighting Procedures:WATER REACTS WITH RESIN,FORAMS INSULATING
FOAM, ABSORBS GASE
Unusual Fire/Explosion Hazard:DECOMP GASES NOXIOUS, WEAR SCBA; H*2O
SPRAG COOL CONT TO MINIMIZE RISK OF RUPTURS,

Spill Release Procedures:EVACUATE UNPROTECTED PERSONS. ELIM IGNITION
SOURCES. STOP LEAK. H*2O SPRAY COOL CONT/DIVERT SPILL FROM
FIRE/HEAT. PROVIDE VENTILATION. ABSORB W/COMMERCIAL
ABSORBENT,SHOVEL INTO METAL DRUMS:LG SPILL:DI KE W COMMERCIAL
ABSORBENT,PUMP INTO COVERED DRUMS.

Handling and Storage Precautions:STORE IN COOL,DRY,WELL VENT,LOW FIRE
RISK AREA. PROTECT FROM PHYSICAL DAMAGE.AVOID ANY PHYSICAL CONTACT.
KEEP CONTAINERS TIGHTLY CLOSED.
Other Precautions:MAINTAIN STRICT HYGIENE, AVOID PHYSICAL CONTACT,
REMOVE & WASH CONTAMINATED CLOTHING. MFG SUGGESTS USE OF PROTECTIVE
SKIN CREAMS. EXHAUST CURING OVENS TO OPEN AIR. AVOID TEMPERATURE
EXTREMES.

Respiratory Protection:IF EXPOSD TLV,NIOSH/MESA APPR SELF-CNTND BRTHG
APP (POS PR MODE)
Ventilation:MECHANICAL (GENERAL/LOCAL EXHAUST)
Protective Gloves:PV/RUBBER
Eye Protection:SAFETY/CHEM GOGGLES
Other Protective Equipment:FULL WORK CLOTHING TO PREVENT REPEATED OR
PROLONGED CONTACT.
Supplemental Safety and Health
PART A OF 2 PART PRODUCT. THIS PART IS POLYMER. SEE P/N B FOR PART
B(HARDENER). MSDS FROM MFG DATED 3/29/73. DATA ON HARDENER INCLUDED
FOR REFERENCE, BUT HARDENER NOT CATALOGED UNDER THIS NSN

HCC:N1
Boiling Pt:B.P. Text:DECOMPOSES
Spec Gravity:1.1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VISLOUS LIQUID; CHARACTERISTIC ISOCYANATE ODOR.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS OR AMINES.
Stability Condition to Avoid:AVOID MOISTURE(CAUSES FOAMING; AVOID
IGNITION SOURCES,HEAT.
Hazardous Decomposition Products:EXPECT ISOCYANATE FRAGMENTS IN OXYGEN
DEFICIENT FIRE.

Waste Disposal Methods:KEEP IN COVERED CONTAINERS PENDING DISPOSAL.
HANDLE AND DISPOSE IN FULL COMPLIANCE WITH ALL APPLICABLE
INTERNATIONAL,FEDERAL,STATE AND LOCAL REGULATIONS. MFG SUGGESTS
INCINERATION OR BURY IN APPROVED LANDFILL. WASH RESIDUE W
AMMONIA,H*2O,DETERGENTS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.