BCYGG - Z MOLY-POWDER

  • MSDS: BCYGG
  • Manufacturer: DOW CORNING CORP
  • Product Name: Z MOLY-POWDER
  • National Stock Number: 6810-00-086-3541
Product Identification

Product ID:Z MOLY-POWDER
MSDS Date:11/02/1988
FSC:6810
NIIN:00-086-3541
MSDS Number: BCYGG

Responsible Party
DOW CORNING CORP
50 COMMERCE DR
TRUMBULL, CT 06611
US

Emergency Phone: (517)496-5900

Cage: 94499

Contractor
DOW CORNING CORP
MONROE, CT 06468 US

Telephone: 203-452-9199

Cage: 94499

Ingredients

MOLYBDENUM DISULFIDE

CAS: 1317-33-5

RTECS: QA4697000

Fraction By Weight: 100%

OSHA PEL 10 MG/M3 TDUST (MO)

ACGIH TLV: 10 MG/M3 (MO); 8990

Hazards

Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:A SINGLE PROLONGED EXPOSURE CAUSES NO
KNOWN ADVERSE EFFECT. MAY STAIN SKIN. ORAL- SMALL AMOUNTS
TRANSFERRED TO THE MOUTH BY FINGERS DURING USE SHOULD NOT INJURE.
Explanation of Carcinogenicity:PRODUCT CONTAINS NO INGREDIENTS
CURRENTLY CLASSIFIED AS CARCINOGENIC BY NTP, IARC OR OSHA.
Effects of Overexposure:EYES- DIRECT CONTACT MAY CUASE TEMPORARY
DISCOMFORT WITH MILD REDNESS AND DRYNESS SIMILAR TO WINDBURN.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid

First Aid:EYES- FLUSH IMMEDIATELY WITH WATER. SKIN- BRUSH OFF AND FLUSH
WITH WATER. AVOID HARSH CLEANSERS. USE WATERLESS CLEANER TO REMOVE
STAINS AND NOT CAUSE IRRITATION.

Fire Fighting

Flash Point:NONFLAMMABLE
Lower Limits:NONFLAMMABLE
Upper Limits:NONFLAMMABLE
Extinguishing Media:WATER FOG, CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:SELF-CONTAINED BREATHING APARATUS AND
PROTECTIVE CLOTHING SHOULD BE WORN IN FIGHTING FIRES INVOLVING
CHEMICALS.
Unusual Fire/Explosion Hazard:HAZARDOUS SULFUR OXIDES MAY BE FORMED
UNDER FIRE CONDITIONS.

Accidental Release

Spill Release Procedures:SWEEP UP MATERIAL TO COLLECT AND CONTAIN FOR
SALVAGE OR DISPOSAL.
Neutralizing Agent:NONE

Handling

Handling and Storage Precautions:USE REASONABLE CARE AND CAUTION.
Other Precautions:PRODUCT GETS IN PORES OF SKIN. STRONG SOAP OR WASH
BRUSH MAY IRRITATE SKIN WHEN TRYING TO REMOVE PRODUCT.

Exposure Controls

Respiratory Protection:USE RESPIRATORY PROTECTION IF VENTILATION IS
INADEQUATE.
Ventilation:LOCAL EXHAUST TO KEEP AREA CLEAN. MECHANICAL EXHAUST
RECOMMENDED.
Protective Gloves:RUBBER OR PLASTIC GLOVES.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:NONE
Work Hygienic Practices:WASH HANDS AFTER HANDLING THIS MATERIAL.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:NOT GIVEN
Melt/Freeze Pt:M.P/F.P Text:2165F,1185C
Vapor Pres:NOT GIVEN
Vapor Density:NOT GIVEN
Spec Gravity:4.8
Evaporation Rate & Reference:NOT GIVEN
Solubility in Water:LESS THAN 0.1
Appearance and Odor:VERY LITTLE ODOR, POWDER, BLACK.

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:SULFUR OXIDES AND MOLYBDEMUN.

Disposal

Waste Disposal Methods:FOLLOW ALL LOCAL, STATE AND FEDERAL REGULATIONS
CONCERNING HEALTH AND POLLUTION.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.