BCYMF - EPOWELD 8173 PART B
- MSDS: BCYMF
- Manufacturer: HARDMAN INC
- Product Name: EPOWELD 8173 PART B
- National Stock Number: 8040-00-092-2816
Product Identification
Product ID:EPOWELD 8173 PART B
MSDS Date:09/24/1991
FSC:8040
NIIN:00-092-2816
Kit Part:Y
MSDS Number: BCYMF
Responsible Party
BELLEVILLE, NJ 07109-3328
US
Emergency Phone: 201-751-3000
Info Phone: 201-751-3000
Preparer: JAMES T. SCHIRRIPA
Cage: 96900
Contractor
Telephone: 201-751-3000
Cage: 96900
Ingredients
NO INGREDIENT FOR THIS FORMULATION_INGREDIENT
Hazards
Effects of Overexposure:PROLONGED OR REPEATED EXPOSURE MAY CAUSE SKIN
IRRIT
First Aid
First Aid:EYE: FLUSH W/WATER 15 MIN. CONSULT MD. SKIN: WASH W/SOAP &
COPIOUS AMT OF WATER. REMOVE CONTAMINATED CLOTHING & WASH BEFORE
REUSE. INHAL: REMOVE TO FRESH AIR. INGEST: CALL MD AT ONCE.
Fire Fighting
Flash Point Method:COC
Flash Point:>495F,>257C
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . COOL EXPOSED CONTAINERS TO PREVENT RUPTURE IN FIRE
CONDITIONS.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.
Accidental Release
Spill Release Procedures:SCRAPE UP BULK OF MATERIAL. SOAK UP REMAINDER
W/CLOTH OR ABSORBENT PAPER, CLEANING W/NON-FLAMMABLE SOLVENT
W/PROPER VENTILATION, MFG REC.
Handling
Handling and Storage Precautions:AVOID BREATHING VAPORS OF HEATED
MATERIAL. PRACTICE GOOD HOUSEKEEPING & PERSONAL CLEANLINESS TO
AVOID SKIN & EYE CONTACT.
Other Precautions:USE DISPOSABLE PAPER ON WORK AREAS & DISPOSABLE
CONTAINERS
Exposure Controls
Respiratory Protection:AMINE CARTRIDGE RESP IF REQUIRED, NIOSH/MSHA
APPROVED
Ventilation:LOCAL EXHAUST RECOMMENDED
Protective Gloves:RUBBER/PLASTIC
Eye Protection:CHEMICAL GOGGLES
Other Protective Equipment:CLEAN, BODY-COVERING CLOTHING
Supplemental Safety and Health
PART B OF 2-PART PRODUCT. MFG INDICATES PART B CONTAINS NO HAZARDOUS
INGRED. KEY1:N1.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:<0.01
Spec Gravity:1.1
Evaporation Rate & Reference:<0.1
Solubility in Water:<0.1 G/G
Appearance and Odor:CLEAR YELLOWISH LIQUID.
Percent Volatiles by Volume:<1.0
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS.
Stability Condition to Avoid:HIGH TEMPERATURES.
Hazardous Decomposition Products:NITROGEN OXIDES, CO &/OR CO*2 & OTHER
ORGANIC COMPOUNDS
Conditions to Avoid Polymerization:DO NOT MIX LG AMT OF RESIN W/CURING
AGENT
Disposal
Waste Disposal Methods:INCINERATE OR LANDFILL IAW LOCAL, STATE, FED
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.