Product ID:TRITON X-100 SURFACTANT,6-1572
MSDS Date:01/01/1985
FSC:6850
NIIN:00-116-6613
MSDS Number: BCZNJ

Emergency Phone: 215-592-3000

Cage: FO048

Telephone: 215-592-2521/215-592-3000

Cage: 77902

OCTYLPHENOXYPOLYETHOXYETHANOL-(HIGH HEALTH HAZARD-MFR)

RTECS: MD0907600

Fraction By Weight: >99%

Effects of Overexposure:EYES: SEVERE PERSISTANT IRRIT. CORNEAL DAMAGE
AFTER PROLONGED CONTACT. (SEE SUPP DATA)

First Aid:EYES: FLUSH W/ H*2O FOR 15 MIN. CALL MD. SKIN: WASH SKIN
THOROUGHLY W/ SOAP & H*2O,REMOVE & WASH CLOTHING BEFORE REUSE.
INGES: DILUTE BY GIVING H*2O TO DRINK & CALL MD. DO NOT GIVE
ANYTHING BY MOUTH T O AN UNCONSCIOUS PERSON. INH: REMOVE TOFRESH
AIR.

Flash Point:>300F;149C (TOC)
Extinguishing Media:CO*2, DRY CHEM, WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA SCBA. USE H*2O SPRAY TO COOL
FIRE EXPOSED CAN
Unusual Fire/Explosion Hazard:EXPLOSIVE MIXTURES MAY FORM BY
COMPOUNDING W/ STRONG OXIDIZING OR REDUCING AGENTS.

Spill Release Procedures:WEAR EYE PROTECTION & IMPERVIOUS CLOTHING.
DIKE & CONTAIN SPILL W/INERT MATERIAL. TRANSFER LIQ & SOLID DIKING
MATERIAL SEPARATELY TO CANS FOR RECOVERY OR DISPOSAL. FLOOR MAY BE
SLIPPERY, USE CARE TO A VOID FALL. KEEP SPILL OUT OF SEWERS/OPEN
WATERS.

Handling and Storage Precautions:STORE AWAY FROM HEAT SOURCES. LOW TEMP
MAY PRESENT HANDLING PROBLEMS DUE TO INCREASED VISCOSITY. PROD IS
CORROSIVE TO COPPER & BRASS ON LONG STORAGE.
Other Precautions:THIS MATERIAL IS RATED A HIGH HEALTH HAZARD DUE TO
CORNEAL DAMAGE. SPEC: TYPE I.

Respiratory Protection:NONE REQUIRED FOR NORMAL OPERATIONS (MFR).
Ventilation:MECHANICAL DILUTION FAN/VENTILATION
Protective Gloves:IMPERVIOUS
Eye Protection:SPLASH PROOF GOGGLES
Other Protective Equipment:EYEWASH FACILITY
Supplemental Safety and Health
PH OF 5% SOLUTION = 6-8. OVEREXPOSURE: SKIN: RPTD/PRLNG CONTACT-MILD TO
MOD IRRIT. VAPORS, GIVEN OFF @ HI TEMP, MAY CAUSE THROAT IRRIT.
HARMFUL IF SWALLOWED. CONTAINER: 1000 ML PLASTIC BOTTLE.

HCC:N1
Boiling Pt:B.P. Text:520F;270C
Vapor Pres:0
Vapor Density:21.0
Spec Gravity:1.07
Evaporation Rate & Reference:<1 (BUAC=1)
Solubility in Water:COMPLETE
Appearance and Odor:CLEAR VISCOUS LIQ;MILD ODOR.
Percent Volatiles by Volume:0

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING & REDUCING AGENTS
Stability Condition to Avoid:EXCESSIVE HEAT
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD OXIDES
OF CARBON.

Waste Disposal Methods:MFR RECM: INCINERATE LIQ. DIKING MATERIAL SHOULD
BE LANDFILLED AT A SITE LARGE ENOUGH TO ABSORB THE SURFACTANT. IF
LARGE AMOUNTS REACH A STREAM OR TREATMENT PLANT VIA LEACHATE,
FOAMING MAY RESULT. DIS POSAL METHOD MUST BE IAW FED, STATE & LOCAL
CODES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.