BDBDH - PR-1538 AMBER/BLACK
- MSDS: BDBDH
- Manufacturer: PRODUCTS RESEARCH AND CHEMICAL CORP
- Product Name: PR-1538 AMBER/BLACK
- National Stock Number: 5970-00-133-8791
Product Identification
Product ID:PR-1538 AMBER/BLACK
MSDS Date:01/01/1985
FSC:5970
NIIN:00-133-8791
MSDS Number: BDBDH
Responsible Party
Emergency Phone: 213-240-2060
Cage: DO563
Contractor
Telephone: 818-240-2060
Cage: DO563
Ingredients
4,4'-METHYLENE BIS (2-CHLOROANILINE) MOCA (SARA III)
CAS: 101-14-4
RTECS: CY1050000
Fraction By Weight: 10%
OSHA PEL S, 0.02 PPM
ACGIH TLV: S, 0.01 PPM,A2; 9394
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
POLYURETHANE POLYMER
CAS: 9009-54-5
RTECS: TR7875000
Fraction By Weight: 75%
ACGIH TLV: 0.14 MG/CUM
Hazards
Effects of Overexposure:IRRITATION TO SKIN,EYES AND MUCOUS MEMBRANES.
First Aid
First Aid:SKIN:WASH THOROUGHLY WITH SOAP AND WATER.EYES:FLUSH
THOROUGHLY WITH LARGE AMOUNTS OF WATER;GET MEDICAL
ATTENTION.INGESTION:INDUCE VOMITING.INHALATION:REMOVE VICTUM TO
FRESH AIR.
Fire Fighting
Flash Point:>200F TOC
Lower Limits:UNK
Upper Limits:UNK
Extinguishing Media:FOAM,DRY CHEMICAL
Fire Fighting Procedures:WEAR AIR SUPPLIED RESPIRATOR WHEN FIGHTING
FIRE.
Unusual Fire/Explosion Hazard:EMISSION OF TOXIC FUMES.
Accidental Release
Spill Release Procedures:ELIMINATE IGNITION SOURCES.KEEP UNPROTECTED
PERSONS AWAY FROM HAZARD AREA.ABSORB EXCESS WITH RAGS,PAPER
TOWELS,OTHER ABSORBENT MATL.CLEAN SPILL AREA WITH METHYL ETHYL
KETONE.SHOVEL INTO CONTAINERS WIT H TIGHT SEALING LIDS.
Handling
Handling and Storage Precautions:PRODUCT IS MOISTURE SENSITIVE,KEEP IN
TIGHTLY CLOSED CONTAINERS IN SHELTERED AREA.PROTECT FROM PHYSICAL
DAMAGE.AVOID ACUTE FIRE HAZARDS.
Exposure Controls
Respiratory Protection:RESPIRATOR RECOMMENDED FOR SENSITIVE
INDIVIDUALS.
Ventilation:LOCAL EXHAUST TO MINIMIZE TOXIC FUMES.
Protective Gloves:RUBBER
Eye Protection:GOGGLES/FACE SHIELD
Other Protective Equipment:USE PROTECTIVE HAND CREAM
Supplemental Safety and Health
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:UNK
Vapor Pres:UNK
Vapor Density:UNK
Spec Gravity:1.05
Evaporation Rate & Reference:UNK
Solubility in Water:NEGLIGIBLE
Appearance and Odor:AMBER OR BLACK SYRUP;SLIGHT IRRITATING ODOR.
Percent Volatiles by Volume:1
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:IGNITION SOURCES
Hazardous Decomposition Products:TOXIC VAPORS OF AMINE AND TOLYLENE
DIISOCYANATE
Disposal
Waste Disposal Methods:PLACE ABSORBED MATL IN TIGHTLY SEALED CONTAINERS
AND DISPOSE IN ACCORDANCE WITH LOCAL,STATE,AND FEDERAL
REGULATIONS.DO NOT INCINERATE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.