BDBXG - 94-009 SEALANT

  • MSDS: BDBXG
  • Manufacturer: DOW CORNING CORP
  • Product Name: 94-009 SEALANT
  • National Stock Number: 8040-00-142-9822
Product Identification

Product ID:94-009 SEALANT
MSDS Date:01/01/1985
FSC:8040
NIIN:00-142-9822
MSDS Number: BDBXG

Responsible Party
DOW CORNING CORP.
3901 SOUTH SAGINAW ROAD
MIDLAND, MI 48640
US

Emergency Phone: 517-496-5900

Info Phone: 517-496-5900

Cage: 5D028

Contractor
DOW CORNING CORP
AUBURN, MI 48611 US

Telephone: 517-496-4388

Cage: 71984

Ingredients

METHYL PROPYL KETONE (2-PENTANONE)

CAS: 107-87-9

RTECS: SA7875000

Fraction By Weight: 25.0%

OSHA PEL 200 PPM/250 STEL

ACGIH TLV: 200 PPM/250STEL;9192


ACETOXYSILANE

Fraction By Weight: <5.0%

ACGIH TLV: SEE SUPP DATA

Hazards

Effects of Overexposure:MAY CAUSE SLIGHT ANESTHESIA,HEADACHES,ETC.MAY
IRRITATE SKIN & EYES.

First Aid

First Aid:SKIN/EYEW;FLUSH WITH WATER.INHAL*MOVE TO FRESH AIR.CALL DR.

Fire Fighting

Flash Point:60F,16C OC
Lower Limits:1.6
Upper Limits:8.2
Extinguishing Media:CO*2 OR FOAM
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE KNOWN

Accidental Release

Spill Release Procedures:MOP,WIPE OR SOAK UP W/ABSORBENT MATERIAL USING
PROPER PROTECTIVE EQUIPEMENT

Handling

Handling and Storage Precautions:SAME AS FOR ANY FLAMMABLE PRODUCT USE
REASONABLE CARE.

Exposure Controls

Respiratory Protection:ORGANIC VAPOR TYPE
Ventilation:MECHANICAL(GENERAL)
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES
Other Protective Equipment:AS REQD. BY LOCAL AUTHORITIES
Supplemental Safety and Health
TLV OF POLYSILOXANE:10 PPM BASED ON ACETIC ACID LIBERATED.

Chemical Properties

HCC:F2
Boiling Pt:B.P. Text:230F,110C
Vapor Pres:25
Spec Gravity:1.35
Evaporation Rate & Reference:<1.0%(ETHER)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:LIQUID,ACETIC ACID/SOLVENT-LIKE ODOR.
Percent Volatiles by Volume:>10

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING/CORROSIVE MATL
Stability Condition to Avoid:SOURCE OF IGNITION
Hazardous Decomposition Products:FLOURINE PROD,SIO*2,CO*2 & TRACES OF
INCOMPLETELY BURNED C

Disposal

Waste Disposal Methods:REVIEW ALL LOCAL,STATE & FED REGS/STATUTES
RELATIVE TO SOLVENT DISPOSAL.HOWEVER,RESIDUE FROM EVAPORATED
SOLVENT CAN BE LAND FILLED OR BURNED IAW LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.