BDDDD - EA 913 PART A

  • MSDS: BDDDD
  • Manufacturer: DEXTER CORP HYSOL DIV
  • Product Name: EA 913 PART A
  • National Stock Number: 8040-00-159-5067
Product Identification

Product ID:EA 913 PART A
MSDS Date:01/01/1985
FSC:8040
NIIN:00-159-5067
Kit Part:Y
MSDS Number: BDDDD

Responsible Party
DEXTER CORP., HYSOL DIVISION

Emergency Phone: (415) 687-4201

Cage: 1JB33

Contractor
DEXTER CORPORATION ADHESIVE & COATING SYSTEMS
312 BAY POINT, CA 94565-3299 US

Telephone: 202-483-7616

Cage: 33564

Ingredients

EPOXY RESINS

Fraction By Weight: 68%


ASBESTOS (AMIANTHUS, OBSOLETE AMOSITE), (FOR OSHA PEL, SEE

CAS: 1332-21-4

RTECS: CI6475000

Fraction By Weight: 32%

OSHA PEL 0.2 FIBERS/CC

ACGIH TLV: 0.5 FIBERS/CC; A1;89

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Hazards

Effects of Overexposure:CAUTION! MAY CAUSE SKIN & EYE IRRITATION.

First Aid

First Aid:WASH SKIN W/SOAP & WATER. FLUSH EYES IMMED W/PLENTY OF WATER.

Fire Fighting

Flash Point:>200F TCC
Extinguishing Media:FOAM, DRY CHEMICALS, CO*2
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:REMOVE EXCESS. CLEAN RESIDUE W/SOLVENTS

Handling

Handling and Storage Precautions:STORE AT 75F
Other Precautions:IF IT IS NEC TO SAND THE CURED ADHESIVE "WET SANDING"
IS RECM TO ELIMINATE AIRBORNE ASBESTOS. FOR DRY SANDING FOLLOW
RECOMMENDATIONS IN SECTION VIII.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPRVD RESP. FOR ASBESTOS IF DRY
SADED, ABRADED
Ventilation:LOCAL EXHAUST & MECHANICAL HIGHLY RECM BY MFR
Protective Gloves:RUBBER
Eye Protection:SAFETY GLASSES OR GOGGLES
Supplemental Safety and Health
KEY1:N1.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:DECOMPOSES
Spec Gravity:1.2
Solubility in Water:NEGLIGIBLE
Appearance and Odor:VISCOUS GREY PASTE W/EPOXY ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Hazardous Decomposition Products:CO, ALDEHYDES, ACIDS

Disposal

Waste Disposal Methods:MFR RECM LANDFILL OR CONTROLLED BURNING AS
REGULATED BY ALL GOVERNMENTAL AGENCIES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.