Product ID:SN 60 WRAP 3
MSDS Date:01/01/1987
FSC:3439
NIIN:00-163-4351
MSDS Number: BDDRB

BOW SOLDER PRODUCTS CO.,INC.

Emergency Phone: (201)686-6040

Cage: 52329

BOW ELECTRONIC SOLDERS

SAYREVILLE, NJ 08872 US

Telephone: 732-316-2177

Cage: 52329

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 58.2%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9192

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 38.8%

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9192

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

ROSIN,CAS #8050-09-7

Fraction By Weight: 3.0%

DIPROPYLENE GLYCOL, CAS #25265-71-8

CAS: 110-98-5

RTECS: UB8785000

Fraction By Weight: TRCE

Effects of Overexposure:LEAD POISNG./METALLC
TASTE,ABD.PAIN,NAUSEA,JOINT/MUSCLE PAIN,WEAKNESS.LOSS OF WT.MENTL
CONFUSION.

First Aid:REMOV.IMM.FROM AREA.SEE DOCTOR.IF BURND,GIVE FIRST AID.DO NOT
ATTEMPT TO REMOVE ROSIN FROM SECOND OR THIRD DEGREE BURNS.USE
SOLVNTS TO REMOV.ROSIN FROM MINOR FIRST DEGREE BURNS.

Extinguishing Media:SPRAY,FOAM,DRY PWDR,CO*2.
Fire Fighting Procedures:USE SCBA.LEAD MAY EMIT TOXIC FUMES.
Unusual Fire/Explosion Hazard:MODE RATE HAZARD WHEN HI.CONC.OF VERY
FINE MET.DUST IS EXPSD TO HIGH HEAT/OPN FLAME.

Spill Release Procedures:NORMAL HOUSEKEEPING FOR SOLID METAL.METALLIC
POWDER OR DUST SHOULD BE VACUUMED OR WET SWEPT USING A RESPIRATOR &
PROTECTIVE CLOTHING.

Handling and Storage Precautions:USE GOOD HSEKEEPNG PRACTICES TO PREVNT
ACC.OF DUST & TO KEEP AIRBORNE DUST CONC.AT A MIN./AVOID BREATHNG
DUST OR FUMES.WASH HANDS AFTER HANDLNG.
Other Precautions:DO NOT SMOKE,OR EXPOSE FOOD TO DUST.KEEP AREA CLN.

Respiratory Protection:MFR DID NOT SPECIFY.
Ventilation:FUME HOOD OVER WORK AREA.200FPM AIR VEL.INTO HOOD OPENING.
Protective Gloves:USE WHEN WELDNG
Eye Protection:SFTY GLASSES
Other Protective Equipment:FACE SHLD IF DNGR OF SPLASHNG MOLTEN
METL./EYEWASH STATION.
Supplemental Safety and Health
UNDATED MSDS.

HCC:N1
Boiling Pt:B.P. Text:1700F
Vapor Pres:<1.
Spec Gravity:8.5
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CORE:CLR SOLID W/LT ROSIN ODOR/SOLDER;GRAY SOLID.

Stability Indicator/Materials to Avoid:YES
ACID,BASES,OXIDIZERS.MOLTEN METAL MAY REACT VIOLENTLY W/WTR.
Hazardous Decomposition Products:TEMPS.ABOVE MELTING PT MAY EMIT TOXIC
FUMES.

Waste Disposal Methods:SCRAP DRIPPINGS & DROSSES SHOULD BE STORED IN A
CLSD CNTNR AND RETURNED TO A LEAD RECYCLR.FOLLOW FEDERAL,STATE AND
LOCAL REGULATIONS REGARDING DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.